electric motor

[Hebert]

I'm looking for a 1 or 2 hp electric motor...if you have anything laying around and want to get rid of it let me know...also if you know where I could find a used one let me know..

[southern151]

Single or 3 phase?

[Gerald]

What RPM?

Do you need a certin type mounting bracket?

For that size.....guess you are looking for a 220 volt.

[Hebert]

we looking for something to run a corn cracker/grinder....its basically a hand grinder for grain with a big pulley....I dont know what phase it would need...its for a friend of mine.. he wants to be able to plug it into a regular receptacle...I guess the biggest size that can be wired to plug into 110volt

[Dink]

I got a 110......gomna have to get back to You On rpm....maybe you can make a pulley system for the grinder

[Hebert]

ok cool..thanks Dink

[Gerald]

Max size on 110 volts would be about 1 hp.

I don't remember how many amps a 1 hp motor would draw. That would depend on how much load it takes to run the grinder. It might be too much load for the breaker to handle.

[Dink]

The one I have is a 1/4hp.....1725rpm......I don't think that'll turn a cracker

[jldsc]

You can get up to a 2hp single phase 110v motor for pools an spa's but there 3450 rpms you would have to sheave it down quite a bit for lower rpms...the water well motors I've worked with on 110 will work a lot harder an pull anywhere from 15-22 amps 220 would make it last longer and start up easier, less load for the starter capaciter an gov points...

[southern151]

Anybody need a couple of 3 phase motors? I got two that don't and likely won't use. They are used but if someone here needed em, I'd be willing to turn em loose.

[Hebert]

just talked to my friend...looks like we will need atleast a 3/4 hp to 1hp 1800 rpms, single phase...

[Shawn Braquet]

just talked to my friend...looks like we will need atleast a 3/4 hp to 1hp 1800 rpms, single phase...
check with J & J armature in lake charles, they may have a rebuilt one laying around that they can make a deal on

[Hebert]

thanks Shawn......we went to tractor supply in abbeville tonight and bought a new one...1hp farm duty..single phase..1725 rpm.... $173 !!....but I will check out J&J armature...if we can get a cheaper used one , we'll just return the new one...