SaltyCajun.com
Page 2 of 3 1 2 3
Show 50 post(s) from this thread on one page

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   Boating Talk (http://www.saltycajun.com/forum/forumdisplay.php?f=28)
-   -   How fast is your rig?? Marsh Missiles (http://www.saltycajun.com/forum/showthread.php?t=4308)

ROOSTER 10-24-2009 11:06 AM
Yawn ....my Shallow Sport can do that....:D

LostCajun 10-25-2009 12:00 AM
Quote:
Originally Posted by ROOSTER (Post 66146)
Yawn ....my Shallow Sport can do that....:D
Like anyone asked or cares what your shallow sport will do.

ROOSTER 10-26-2009 09:06 AM
Quote:
Originally Posted by LostCajun (Post 66376)
Like anyone asked or cares what your shallow sport will do.
****!.......YOU CARE....I KNOW YOU DO.:rotfl:

yak'em-n-stack'em 10-26-2009 09:21 AM
Quote:
Originally Posted by CatDaddy (Post 66021)
YouTube - Wicked at Web Slough

this is my boat in action.. Thats me and Bay Slayer pulling my trawl catching skrimps.. Think how fast we can go if we didnt have the trawl..

that boat is sitting wayyyy to even keeled to have you in the drivers seat cat daddy:eek::eek::eek:

CatDaddy 10-26-2009 10:50 AM
Quote:
Originally Posted by yak'em-n-stack'em (Post 66954)
that boat is sitting wayyyy to even keeled to have you in the drivers seat cat daddy:eek::eek::eek:

Pffffttttttt... the gas tank is on the opposite side as me.....

Besides... Im not fat.. Im buffed..


Got some needle and some thread?...... cause im RIPPED

crazy_coonass 01-11-2010 04:42 AM
i got a 17/48 all weld with a 115 johnson with me, my gear, and my buddy i am runnin about 65

B-Stealth 01-11-2010 07:55 AM
Thats Fast
 
Quote:
Originally Posted by crazy_coonass (Post 100289)
i got a 17/48 all weld with a 115 johnson with me, my gear, and my buddy i am runnin about 65
Wow, DING DING DING we got a winner. :eek:

LaAngler 01-11-2010 10:37 AM
Quote:
Originally Posted by crazy_coonass (Post 100289)
i got a 17/48 all weld with a 115 johnson with me, my gear, and my buddy i am runnin about 65
I call bs

SULPHITE 01-11-2010 11:23 AM
wow...living life on the edge eh??

fritz20 01-11-2010 11:41 AM
Quote:
Originally Posted by LaAngler (Post 100322)
I call bs
I smell that too

Montauk17 01-11-2010 12:30 PM
Quote:
Originally Posted by crazy_coonass (Post 100289)
i got a 17/48 all weld with a 115 johnson with me, my gear, and my buddy i am runnin about 65
No way...

Gerald 01-11-2010 12:59 PM
I have a 12' x 32" alum. boat with a small go-devil.

The boat is rated for max of 8 hp. I tried a 15 hp outboard on it. After I put some weight up front, it would really get up and going. Don't know how fast it was going....I did not bring my GPS, but it was way to fast to feel safe in that small of a boat.

That outboard did not start easily and was not reliable so I did not ever use it on a hunt. It would have "kicked azz" compaired to the go-devil.

huntin fool 01-11-2010 05:16 PM
Quote:
Originally Posted by LaAngler (Post 65510)
i used to run a 15/42 semi-v alweld with a yammy forty in sabine, it would do about 44 or so with my duck huntin gear.... it would eat the 25's.

then had a 15 marsh runner we ran with a mega 25 with 50 carbs, etc.... it had a 50 inch bottom but even with a load still ran a good 40+

they were getting 85 horsepower out of some of the 40 mercs but it was hard to find a hull that would use all the power without pounding you to death.

Marsh runner? Like the old ones? They started making them again, they tried selling my dad one for me, said it was LIGHT, aint nothing light about the new ones.

LaAngler 01-12-2010 12:17 PM
marshrunners were good boats, little heavy vs aluminum but with a wide bottom you dont lose much speed. they a lot better ride and quiet.

crazy_coonass 01-12-2010 11:41 PM
Quote:
Originally Posted by Montauk17 (Post 100364)
No way...
i will post pics of it when i get home from the rig

fritz20 01-12-2010 11:50 PM
Quote:
Originally Posted by crazy_coonass (Post 101101)
i will post pics of it when i get home from the rig
Pics of the rig or the GPS that says 65?

LaAngler 01-13-2010 03:34 PM
i really wish yamaha would make a tiller 15 inch shaft model of the 2 stroke 50

why oh why did they take our 3 cylinder 2 strokes away :cry:

Montauk17 01-13-2010 04:03 PM
In order to go that fast on that small of a boat you would need atleast a 28 pitch prop. They do not make a 28 pitch prop for a v4 lower unit,unless it was custom made. Show me a video with a gps saying your going 65 and I might belive it.

Montauk17 01-13-2010 04:06 PM
Quote:
Originally Posted by LaAngler (Post 101267)
i really wish yamaha would make a tiller 15 inch shaft model of the 2 stroke 50

why oh why did they take our 3 cylinder 2 strokes away :cry:

You can thank the EPA for that. In the next few years there will be ZERO 2 strokes on the market. 2009 was the last year for any carb 2 strokes,now all there building in the plants are DFI motors like the optimax.

huntin fool 01-18-2010 02:55 PM
well im proud of my baby....

Today she was loaded down...(2 people, ice chest, tackle, batteries, etc) beat a merc 25, with one man (small dude) and didn't look to be loaded...

Musta been dat high octane i put in der :smokin:


All times are GMT -5. The time now is 12:26 PM.
Page 2 of 3 1 2 3
Show 50 post(s) from this thread on one page

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted