SaltyCajun.com
Page 3 of 3 12 3
Show 50 post(s) from this thread on one page

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   Boating Talk (http://www.saltycajun.com/forum/forumdisplay.php?f=28)
-   -   Is my outboard mounted too low? (http://www.saltycajun.com/forum/showthread.php?t=19847)

Gerald 06-19-2011 11:23 AM
Quote:
Originally Posted by booyagasha (Post 271439)
dang....just checked out the boat and my bilge aint working....flip the switch nothing...checked fuses...everything ok...

what should i look forhttp://i880.photobucket.com/albums/a...619_081559.jpg

Did you use a volt meter and check to see if you were getting 12 volts on each side of the fuses? Check voltage until you find where the problem is located.

Shawn.....we were typing at the same time.

alphaman 06-19-2011 11:30 AM
get a test light see if you have fire at the bilge (if u do motor may be bad) if you dont check the ground wire, then try again c if it works. ground wire needs to be grounded good.

1fastmerc 06-19-2011 11:57 AM
Quote:
Originally Posted by weedeater (Post 271184)
That looks pretty good, next step would be jack-plate
This is coming from a guy who has no patientince so I had to set his motor.

booyagasha 06-19-2011 12:19 PM
Gonna check it once fathers day calms down thanks for the input

flounder_smacker 06-19-2011 05:58 PM
did you figure out how to take that pin out?

booyagasha 06-19-2011 06:00 PM
Quote:
Originally Posted by flounder_smacker (Post 271582)
did you figure out how to take that pin out?
man, truthfully, between boiling crawfish, and trying to figure out what's wrong witht the bilge, i never even got to look at it. not too mention the scorcher today.ill have a look after class tomorrow.

weedeater 06-19-2011 06:02 PM
Quote:
Originally Posted by 1fastmerc (Post 271449)
This is coming from a guy who has no patientince so I had to set his motor.
which I had to reset agin:eek:

1fastmerc 06-19-2011 07:38 PM
Quote:
Originally Posted by weedeater (Post 271588)
which I had to reset agin:eek:
Because you had your prop worked on.

weedeater 06-19-2011 07:43 PM
Quote:
Originally Posted by 1fastmerc (Post 271623)
Because you had your prop worked on.
no because I had to change my exhaust do to your awsome merc mechanic that cant even get your motor fixed:p

1fastmerc 06-19-2011 07:51 PM
Quote:
Originally Posted by weedeater (Post 271625)
no because I had to change my exhaust do to your awsome merc mechanic that cant even get your motor fixed:p
If and when I do we will see about my mechanic.

weedeater 06-19-2011 08:37 PM
Quote:
Originally Posted by 1fastmerc (Post 271631)
If and when I do we will see about my mechanic.
I wouldnt let him work on nothin, never mind he's just holdin your motor.....:*****:


All times are GMT -5. The time now is 02:59 PM.
Page 3 of 3 12 3
Show 50 post(s) from this thread on one page

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted