You won't live that long..............:shaking: :smokin:

Running wide open was one of the break in procedures for my motor.
I had to run at different RPM's for 5 minutes each, for 10 hours.
I had to run wide open for several cycles.
I didn't like to, but the dealer said it was how it was supposed to be done.
After that 10 hours, they said to run it how I wanted. It don't matter no mo.

On our jet ski's we ran, at certain RPMs for "X" amount of time. Just like you stated above.

Chris has been selling these boats and motors for years so Im 100% sure he knows what he is doing..... Thats why he took it out today to break in and set Jackplate with prop

My dealer also told me what they got for a top end also.
They ran it before selling it, just to make sure nothing was wrong with
the boat or motor.

Hope he put 2 hrs on the motor under 3/4 throttle before wfo.:eek:

Good stuff here.

Yep for a guy who hates Texas, he sure does pump a lot money in here buying all our products!!!!!!!!!!!!!!!!:*****:



Oh by the way.............................I'm still waiting.

Still?

He wants my autograph....He sent me of my his copies for the sportsman..... :p

I've heard of a lot of the bass boat guys breaking in motors like that, WFO right from the start.

I know it's not a boat motor but when I bought my 4wheeler a couple of years ago the dealer told me to break it in like I'm gonna drive it, that that's the best way...

if it's faster than a 24 HO with a 250 it runs 60 plus easy

With Waltrip driving, he'll max it out at 30 mph....



Personally, i like how rosska drives his triton...2 speeds, Dead stop or Wide open!!!

W seem's like you never get brake on the B.S. O well if they ragging you they're leaving some one else alone. Ithought i saw a new black hull rig with a merc around 12:30 close to Texaco cut. Didn't pay it much mind cause I was heading for the south end.

You really need to cut down on that stuff!

:*****::*****::*****:







You know how ya know when someone really screws up?????????????








They tell you if you got something to say take it to PM.


Kinda funnny after talking all that smack about when he gets the IP, I'm gone.

So, let me see he must of got the IP and figured out how wrong he was!!!!!!!!






AGAIN!!!!!!!!!!!!!!!!!!!

:rotfl:

Well, it could have something to do with all the slinging it he does......ya think.

Ok I'm done ............................for now. He knows he was wrong.

:*****:

Break In
 

Mercury break in states 30 second burst of wot in the first hour of operation is exeptible and it did not take more than 30 seconds to walk off from him so hook that computer to and see i will warranty his motor for five years no questions and i hope to have my new dealership in Lake Charles by the first of the year so W wont have to drive far for service see yall soon Haynie and Mercry outboards in Lake Charles sweeeet,