SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   General Discussion (Everything Else) (http://www.saltycajun.com/forum/forumdisplay.php?f=2)
-   -   Reciever Pin corrosion-NEED TO CHECK (http://www.saltycajun.com/forum/showthread.php?t=60685)

Elbert Chamblee 07-07-2015 10:59 PM

Reciever Pin corrosion-NEED TO CHECK
 
1 Attachment(s)
Just received this picture of a corroded locking pin. Had been in truck for about 8 years. They thought it was stainless steel.

papap 07-08-2015 06:01 AM

Wow not good.

jpeff31787 07-08-2015 08:36 AM

yikes... harbor freight? I find most of their stuff is garbage.

My pin is perfectly fine, probably 15-20 years old. Fish every weekend too. Not from harbor freight.

NotEZ2Beat 07-08-2015 09:28 AM

I actually just took my pin and all out. masked off the lock itself and then sprayed it all with plasti-dip. I hated the way that the rust looked. Not sure how well it will hold up but just thought I would mention it.

duckman1911 07-08-2015 01:48 PM

Stainless does not mean rust proof. Less and proof are different things.

kibb 07-08-2015 07:56 PM

Reciever Pin corrosion-NEED TO CHECK
 
I have one that looks identical, but only smaller on the tongue of one of my trailers. If it is the same manufacturer it is chrome plated, not stainless, as most are.


All times are GMT -5. The time now is 03:24 PM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted