Shimano Reel parts
 

Anyone know why they do not list this part on the website its the bearings set that pops in on the right side of the reel plate where your handle goes..

they have every piece on this sheet but not the pop out bearing

its is in the plate behind numbers 15 and 16

https://fishshop.shimano.com/vip/pro...45524441848573

3819?? or it might be part of 4043

Found it on ebay.... can not believe Shimano does not have this piece on its schematic diagram

http://www.ebay.com/itm/Shimano-One-...item43cf521252

Its ur roller clutch bearing, on the core model 100 its part #3910, but on the 50 its not listed as a seperate part. It may be the same part as 100, but it looks like it comes with the core 50 side plate part #4043. Take a look at the schematic on the 100 and u will see what im talking about. hope this helps. LCT can help also

W.

No bearing on that shaft.

It's UR part of anti reverse

Is it corroded ???? If so put just enough wheel bearing grease after you reinstall part # 4042 to keep moisture out the lil open spaces.....Mine corroded and since i sealed it with grease no more problem......

I have 6 reels and ordered all new kits for them but have 3 that the roller clutch bearing that is slipping

I found em on eBay for $12 so got 4

Check out ,,,professional sport shop,inc.
920 julia street
new orleans,la. ,70113

504-522-3771

you ain't gunna beat'm...................

X2. Been ordering parts for yrs from them. I would have called shimano.. They may have replacement them for nothing.

Last time I called shimano they told me to go through one of their parts dealers....I used to order through them years ago but I guess they quit that.....
PSS handles just about all brands of reel parts.....Bout the only thing good come out of new orleans............

Great service. Been using them for years.

I have two cores that have corrosion issues but they are the older ones but I heard that Shimano will replace the body , so I'm going to call these guys and see what they say

NEED SOME HELP; When working plastics with my core, the spool comes loose on the retrieve and starts free spooling. Anyone had this happen before? I just had the damn thing serviced at LCTACKLE

Yea that is that piece I posted about... Roller clutch bearing