It's coming along nicely. It's almost time to start going back together.
|
I have to say that Corey has been a real pleasure to work with and I'd highly recommend him to anyone considering a project like this. He is keeping a very close eye on the cost and time involved and they are flying along. I know where I will bring all of my future work to.
That boy don't do any half azzed work. Either it's going to get done right or you can take it somewhere else.Seen him fire folks over the words ,"that's good enough". |
Quote:
The week coming should begin to see some big advances coming on the car! We discovered that it's been hit in the rear pretty good so, it's gonna hit the frame machine for a little while to pull it back around to square. After that, we'll be doing some bracing and, cutting quarters off and, doing the mini-tub for the rear section.:smokin: The build is about to get exciting! Also, there has been a change in direction for the motor. Let's just say...It's BIGGER!:D |
A little progress...
2 Attachment(s)
|
Mini Tubs going in. This is going to be a BAD car! Joe told me the engine will put out over 450HP.
|
Man this is giving me the itch to get my mustang started!!!!
Sent from my SAMSUNG-SGH-I317 using Tapatalk |
Starting to mock up for reassembly
3 Attachment(s)
|
3 Attachment(s)
Here's a quick peek at what's been happening on the Stang. This is really the hardest part, and most time consuming of body work. I'd bet both quarters have been on and, off the car no less than 2 dozen times EACH! It's a LOT of measuring and, fitting up but, it'snow got both quarters welded on!
Attachment 66447 Attachment 66448 Attachment 66449 |
Can't wait to see it again.
|
That thing is gonna be bad arse when its complete.... You sure it's still going to be for the wife?! Lol
|
Wellll...... That's what I tell her. ;-)
|
1 Attachment(s)
I can't believe Corey hasn't posted any updates in a while. Since he likes teasers so much I think I'll just leave this pic here....:D
|
2 Attachment(s)
I've been ridiculously busy with aggravating work but, here's a couple of pics for your viewing pleasure!
Attachment 67055 Attachment 67056 |
Corey, you got any of that yellow boat paint left? If so, you need to paint the top with dat!
|
Quote:
|
Any new pics Corey?
|
Quote:
|
5 Attachment(s)
Here's some pics of the front suspension as it was and, as it's coming together. I hope to be hanging control arms tomorrow!
Attachment 67816 Attachment 67812 Attachment 67813 Attachment 67814 Attachment 67815 |
Wow :eek:
One helluva project goin' on !!! |
1 Attachment(s)
The front suspension is now in. It has a TCI IFS installed with Shockwave air suspention by Ridetech on the front. The rear will be a 4 link also with shockwaves on the rear. Controlling the Air suspenstion will be the Ridetech digital ride control. The neat thing about this control system is it works off of actual level sensors and pressure. It also has a App that can control the system via your cell phone. Pretty trick. The brakes are Wilwood.
|
All times are GMT -5. The time now is 11:21 PM. |
Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted