smooth move |
12-06-2014 08:38 PM |
Quote:
Originally Posted by Ilovestohunt
(Post 731492)
Nice work. Post a few more pics. I think I can get a few rims
Sent from my iPhone using Tapatalk
|
all the pics look about the same as far as construction goes.
i cut the backside of the rim off flush with the lug nut plate and welded it onto the front side on the fire pit. i did the same on the grill, only didn't weld it back on, i built the grill in the cut off pc and inset it into the main rim. i put outside handles on the grill and a davit on the bowl. the boot ring is a 3/4" pipe bent in a hyd jack bender and welded at the ends.
the grill brace on one is 1/2' SS ROUND STOCK AND 1/8" X 1" FLAT BAR on the other. like i said before, still need some grill material. really don't want to have go buy it in a 4 x 8 pc.
|