2006 merc optimax 75 HP no fire
 

Running along, zero problems and died. Will not fire at all. Yes, kill switch is engaged lol

Sent from my SAMSUNG-SM-G900A using Tapatalk

sorry to say but that sounds like your ECM died, big $$$ unless you can find a used one on ebay

If it wont turn over check the fuse next to the starter.

Turns over fine just no fire.

Sent from my SAMSUNG-SM-G900A using Tapatalk

wonder if the kill switch didnt crap out?


Sent from my iPhone using Tapatalk

[QUOTE=jldsc;697259]wonder if the kill switch didnt crap out?


i think that happened to bassyakr

Yep common problem with em.

How do you bypass the kill switch?

Sent from my SAMSUNG-SM-G900A using Tapatalk

pull the cowling off...there should be 2 wires plugged into the kill switch fairly close to it....just unplug it and check to see if you have fire


Sent from my iPhone using Tapatalk

the tether kill switch


Sent from my iPhone using Tapatalk

I'll get him to do that today. My sons boat he just bought.

Sent from my SAMSUNG-SM-G900A using Tapatalk

Before jumping into splicing a safety feature of a boat why not check over some obvious items.
1. Is there are audible warning horn going off when you turn the key to run position?
2. With the cowl off can you hear the fuel pump prime when you turn the key to the run position?
3. Check to make sure all of your fuel lines and air hoses are connected and haven't blown off the fitting.(sounds crazy but I had my opti kill like yours once and it was only the air compressor line to the fuel rails coming loose.)
4. Check all of your onboard fuses
5. There is a website called bbcboards.net I think. There is a wealth of optimax troubleshooting knowledge in there.

Thanks for the link. No alarms, fuel pump is priming, haven't check hoses, fuses are good.

Sent from my SAMSUNG-SM-G900A using Tapatalk

Oh and the splice would just be temporary.

Sent from my SAMSUNG-SM-G900A using Tapatalk

Will the engine not fire at all now?
Have you verified the vst is in fact getting fuel?
fuel bulb is firm and not collapsed
Not out of gas

No warning horns huh?

2006 merc optimax 75 HP no fire
 

you dont have to splice anything...just unplug it...its a factory plug in put there to be able to replace it...dont splice anything yet


Sent from my iPhone using Tapatalk

He pulled plugs. They are wet, so getting fuel. Checked spark, plugs showed fire. Bulb is firm. Fuel, fire while plugs out and won't even act like it wants to start. No idea!

Sent from my SAMSUNG-SM-G900A using Tapatalk

You might also look at your air compressor. U can pull the belt and rotate the compressor pulley to listen for any clanking.

All just shots in the dark.
Also check your kill switch like someone said. Verify all your connections are secure to kill switch

Thanks for the info. He actually changed kill switch this morning. I'll mention the compressor. Think he's about to take it to Jerry's.

Sent from my SAMSUNG-SM-G900A using Tapatalk

if he has fire at the plugs it isnt the kill switch...probably somethin a little more detailed


Sent from my iPhone using Tapatalk