On/Off hull cleaner
 

I used some ON/OFF hull cleaner the other day to strip all the old wax off and to clean the bottom of the boat...Question is I bought the star bright wax with PTEF and it seems nice...How many coats should i put before I put her back in the H20....thanks chris.:smokin:

2 coats of wax is what I put on my boat.

Aight thanks chug

I would say at least two.

Thats what i was told, rather have enough and no brown than have to redo it..lol.

I hated doing my Kenner . If you could get it off the trailor and up higher it wouldnt be as bad.

Ye sides are cake botom is a ..... , pain in the butt...i only wanna do it twice a year under there not every other week, better do it right the first timee....lol.

Would be nice if you could just flip it over and do the bottom..
Make sure you use a good soap to wash it between waxes ,some soaps take the wax off .

Gotcha

kenner when did you sell your kenner, buddy of mine has a 22 ft kenner..did you like it...

I sold it in march of this year. I loved it ,but it was one of the real kenners before they sold out to bass pro. Im looking for another one now. I think the ones after 2000 are the bass pro versions. I have herd mixed reviews on those models .

Hull cleaners BADD
 

Hull cleaners are bad they hurt the gelcoat dont get me wrong they work great if you must use a hull cleaner you should go back over with 3m high gloss compound and put atleast two coats of wax other i work in a fiberglass boat repair shop people come in with stained hulls all the time

What is the best/ safest thing to scrub the floor of the boat with to get the blood out??

Some times soap and water a scrub brush and some elbow grease if that dont work than compound with a scrub brush this is for texture onlyyy if its on smooth then just us soap and water it

What is the best Cleaner/soap to use for inside of boat.

Softscrub works great on stains, its like a compound w/bleach. Been using it for a 10 years on my pathfinder, its got a textured covering on the decks and floors. Hell it even takes spike-it dyes off.

Hull cleaner?
 

What do you rec. for a hull cleaner?

Just a word of caution, after you put the first coat on, put just a small area with a second coat and see how hard it is to get the haze off.
I made the mistake once of putting on a coat of 3M wax once, then decided to do a second coat. After I covered the whole boat with the second coat, I like to never got it off. Sometimes one is enough, then cover with a teflon polish to cover the wax.

There is a real good non-skid deck cleaner at Walmart in a dark blue bottle. Attwood is the brand. I hate Walmart and never really cared for Attwood products cause they are usually cheap, but found this stuff by accident. It works great for non-skid.