Tiny tach?
 

Im looking at buying a S/S prop and I need to know what rpm im running before I order. Has anyone installed a tiny tach on an outboard before? If so whats it consist of for the install.

Thanks!!!

It's pretty easy. One wire is grounded on the block somewhere and the other wraps around a spark plug wire 3-5 times.

Make sure you run the wire on the opposite side of the block from the coils and cut off the extra on the wire you wrap around the plug wire.

Thanks for the help. Do most boat dealers have them or it must be ordered?

bought mine at local Yammy shop but most dealers should have them

I did mine like that to make sure I didn't have any interference from the coils. Sounds like I didn't have to, but i didn't try it any other way.

Sent from my Windows 7 Phone using Board Express

You can order them online. Do a google search for tiny tach. They are very helpful people.

Sent from my Windows 7 Phone using Board Express

Google tinytach

Santa's delivering a Powertech this year ???

YES! I have been a good boy this year!! Jack plate and power tech prop! Im not going to do anything to my boat for a few more weeks. I dont want to pull the motor off untill it gets to cold to go fishing. (Thats very very cold outside for me not to go):D

Good for you !!! What jackplate are you going to use ???

Vance jackplate 4 or 6 inch setback not sure just yet? Im going to order the jakeplate run it with my alum. prop find out what R.P.M. im running and get with power tech.


http://www.vancemfg.com/Index.html

How did your install go ???

Hydro