Has anyone switched out yama sws II props and hubs??
http://pagead2.googlesyndication.com.../imgad/dot.gif
i have contender 25t. with twin yama 150 4 strokes. Has anyone switched out there saltwater series II props and hubs to something better with no chatter and better performance???? |
whats your rpms wide open?
|
45 if i can remember
guess i will have to check them again??
|
You should be turning between 5500 and 6000 wide open.
do you know what your props pitch is? |
no- how do you tell?
i know stupid question, but i have never checked
|
Quote:
|
k, thx
thx
|
Pitch is 17
Running 45 mph and 5500 rpm wide open Looking at raising engines up as well Enertia or thunderbolt prop or powetech 4 blade also Definitely changing hubs and props |
Quote:
|
42 MPH on GPS and 5400 RPM's
42 mph on GPs or 36knots which matched up with speedometer and 5400 RPMs WOT
ken said its around 3 to 5 % slip ??? not sure i am saying this right? cruising was 3900 RPM's and 30 mph or 26 knots on GPS |
prop numbers
prop numbers were:
17 TL 15 1/2 not sure if i told u correctly earlier |
Quote:
|
thanks for info!
i will let u know. i am just mainly changing out props and hubs to stop chatter from those sws 11 props
|
b
|
ken at propgods.com is the man. went with 15 pitch merc enertia and thunderbolt hubs. no more clatter and better hole shot. if u have a prop issue, he can help
|
All times are GMT -5. The time now is 06:19 PM. |
Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted