SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   General Discussion (Everything Else) (http://www.saltycajun.com/forum/forumdisplay.php?f=2)
-   -   need some help here (http://www.saltycajun.com/forum/showthread.php?t=55814)

ironworker 08-24-2014 06:24 PM
need some help here
 
ok
got a 24' skeeter bay boat with 2 150 yammy's 4 strokes on her....
what trolling motor and shaft lenth do I need ?

let's hear it !!

meaux fishing 08-24-2014 06:40 PM
54 or 60"

eman 08-24-2014 07:07 PM
60" 81 lb 24 v minimum

swamp snorkler 08-24-2014 07:10 PM
Quote:
Originally Posted by ironworker (Post 715894)
ok
got a 24' skeeter bay boat with 2 150 yammy's 4 strokes on her....
what trolling motor and shaft lenth do I need ?

let's hear it !!
The biggest I-pilot they make.

meaux fishing 08-24-2014 07:22 PM
need some help here
 
Quote:
Originally Posted by swamp snorkler (Post 715906)
The biggest I-pilot they make.

X2. I would definitely get a 36 V motor

bayouchub 08-24-2014 08:24 PM
Quote:
Originally Posted by eman (Post 715905)
60" 81 lb 24 v minimum
24v would be way underpowered on any 24' bay boat. Go with a 36v with a 60" shaft.

ScubaLatt 08-24-2014 09:03 PM
Well since you have twin outboards why not put twin 101 Riptides on it?

swamp snorkler 08-25-2014 06:03 AM
Quote:
Originally Posted by ScubaLatt (Post 715933)
Well since you have twin outboards why not put twin 101 Riptides on it?

Since he has twin 150's he can probably go with twin 80# thrust

yigodiver 08-25-2014 11:17 AM
How would you wire up twin trolling motors, could that be done with 3 batteries, or have to carry 6 batteries, then you would have 72 volts correct?

alphaman 08-25-2014 04:51 PM
Ok you guys are joking about twin trolling motors. Hun [emoji23] unless they're on the trim tabs then ok I see

alphaman 08-25-2014 04:58 PM
1 Attachment(s)
Attachment 73780 this looks cool [emoji12]

keakar 08-25-2014 05:18 PM
Quote:
Originally Posted by yigodiver (Post 716015)
How would you wire up twin trolling motors, could that be done with 3 batteries, or have to carry 6 batteries, then you would have 72 volts correct?
no 6 batteries 3 wired to each motor separately and I would "assume" there is a way for the I-pilots to team up on holding the same course and work as a team

Quote:
Originally Posted by ironworker (Post 715894)
ok
got a 24' skeeter bay boat with 2 150 yammy's 4 strokes on her....
what trolling motor and shaft lenth do I need ?

let's hear it !!
I cant see anything less then a 100+ trolling motor and I would "think" you would need the biggest they make for that boat or you will be at the mercy of tides and winds and not be able to fish and move about as you choose to unless its calm with slack tides


All times are GMT -5. The time now is 03:31 AM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted