Quote:
Originally Posted by meaux fishing
Gonna try to test that and the trim switch tomorrow. My guess is a bad wiring harness, but I'm still keeping my fingers crossed for an easier solution. Thanks for the ideas so far
|
Even if it is inside the harness, to eliminate/bypass/isolate the harness is, one by one clip the wire on one side (key switch) then the next side(to battery) and butt connect them together one wire at a time so nothing gets mixed up. Disconnect battery side first so you don't short anything. This way if that's what is you don't have to wait for a harness.
"Go ahead, share your opinion! I won't cry"