I am going to attempt to make some of these. for my first attempt the led strip lights seem easier for me to make. my plan is to wrap a piece of pvc with the led strip then insert that pvc pipe into a clear plastic pipe that has weights at the bottom. i am not sure if this is the correct but next i plan to attach some heavy duty wire or extension cord directly to the wire at the end of the light strip. at this point drill a hole in the top of the cap run the wire through and seal it. on the end of the wire connect my battery clips. am i missing anything. i am not familiar with running lights off of a battery and if i need any type of converters or anything else. thanks in advance
|