Been a while since the last post, been lots of smaller things that aren't picture worthy, but we overall there has been lots of progress made. We got the electronics box on and we have the tower on, and all the electronics are wired up. That's a new Furuno 1870 GPS/Sonar and then a bluetooth Sony radio, some Fusion 6.5's and then the new VHF. I am still waiting for the gauges, I have a tach and a temp that I'm going to just put in tomorrow while I wait on the cummins panel. We still have a little to do, the sunbrella top is due to be finished on Monday, and then we can put on the Taco Outriggers and the antenna. We got all the bilge pumps hooked up, battery installed, perko switch, shifter and gas hooked up, steering is all hooked up and rudder is in.
Here's a couple of outside shots, we're in a new boat yard that's a bit more secure as we have all the high dollar stuff on the boat now.
Still have to get the name on the side, paint the bottom and polish the sides out, not in that order. The boat also needs a good cleaning, it's super dirty. And then lastly we'll paint the floor and see if it floats. Almost there...