So the glass was dry this morning. We left the woven cloth on the outside, so we don't have to sand as much to stick stuff to in. So we put the two layers of mat on the inside, and once layer of 18oz woven. Let that dry with the mat out. And then today, we are putting some PVC tubes on the outside to keep it straight. These are 4 inch PVC tubes, and we are using bondo with extra cat. like glue. You can catilize the bondo hot and it dries in like 3 minutes. Then we are going to glass these on.
Here's the first tube
Here's the second tube
More pictures to come in a bit.