|
General Discussion (Everything Else) Discuss anything that doesn't belong in any other forums here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Toggle switch question.
Could just be moisture on the switch... What could be causing this to happen. |
#2
|
||||
|
||||
bad switch. Faulty wiring. Moisture.
Mostly in that order. |
#3
|
|||
|
|||
what he said! change the switch out.
|
#4
|
||||
|
||||
Everything is fine it was my auto bilge stuck. I had go tap it. If off now back to normal. Its an on off switch for it, I didnt know it had a float it the pump. But now I know if it is off and the light its on something is wrong!
|
#5
|
||||
|
||||
Does anyome know what ANC mean on the switch
|
#6
|
||||
|
||||
Normally ANC stands for anchor I think. 3 way switch. Up is nav, bottom is ANC, and middle is off. Up and down are both closed and middle is open. I think
|
#7
|
||||
|
||||
Yep its a 3 way switch. Up Nav. Lights middle is off anc down
|
#8
|
|||
|
|||
Anchored. Switch position to use for anchor lights. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|