Need help with porpoising

[Flex]

Hey guys, need some help. My boat is a 17' mod v aluminum. I'm running a 70 Evinrude with a 6" jack plate no tilt/trim.

I have been through multiple props and here's my issue. If i trim it down it doesn't porpoise at all, but i lose speed. If i trim up i gain speed but porpoise, and it gets worse as i accelerate. If i trim motor down one notch i lose speed and bow is too low but no bounce.

I've tried about 4 different props, just had a racing prop guy add some cup, adjust rake and shave tips on my 13 3/8 17 pitch stainless.

I swear it gave me even more stern lift!

I do have gas tank up front under decks but even when I'm only on a few gallons it handles the same.

I came across some old posts about adding hook in the rear. Does this sound like it may help?

I run 40 at about 57-5800rpms porpoising. I think I'll lose water pressure if i crank jack plate any more.

I can attach pics if anybody needs to see what I'm working with.

Sorry for the essay guys. Beating my head against the wall two years on this thing!

Sent from my SAMSUNG-SM-G891A using Tapatalk