Minn Kota Riptide 70 SC

[garyl]

have 3 minn kota's Riptide 70 sc for one boat and still have times whe I do not have a working troll motor

[Gerald]

I have had many problems keeping mine [same TM] running.


Had to have it fixed several times the first year under warranty. Wire came off the five speed switch, new switch, wire broke off the switch.


I did not need the long shaft [53" ??] so I cut it off about 10". I did this to cut down on the head vibration..... see above problems.


I had the motor seal fail, allowing water to get into the motor.


I have taken the TM apart so many times, I should start a business.


I also installed a "bumper" and use a bungee cord to prevent "head" vibration. I installed a small bungee cord inside the head to hole the switch in place. This has finally kept my TM working. A couple years ago, I over a 10 trip span the TM quit on me 8 times.

[redaddiction]

The 70's are horrible. Seems everyone I know with hem have issues. The 80lb is much better.