Haynie Boats..Talk to me

["W"]

I want a 4 stoke yammy....just getting a price with Mercury.....

[Salty]

Originally Posted by all star rod

What does this boat cost for example with a 150 4 stroke Yamaha...ready to fish. I am sure the troll motor is extra...80# thrust plus GPS/Fishfinder.

W doesn't need a "GPS/Fishfinder". He knows where to go to catch fish and his dinks won't show on the sonar.

[huntin fool]

Originally Posted by Salty

W doesn't need a "GPS/Fishfinder". He knows where to go to catch fish and his dinks won't show on the sonar.

there installing a special gps/BIRD FINDER

[Capt. Ryan Rachunek]

Originally Posted by Hopedale Hustler

sure it wasnt just the one you heard....my cousin runs one on back of his yellowfin in venice..and that thing is sweeeett...

just not on gas so much..

I was on a boat with twin 350's, don't know if it makes a difference.... Strong motors, I just didn't care for them....

[LaAngler]

the fly by wire verado 350 supposed to be better

[redspeck82]

Yea and the verado 350 is a V-6 insted of a V-8 so it might get alittle bet MPG.

[SULPHITE]

W I think there is a haynie boat hanging at spicers...

[cmdrost]

that is/was Stansels boat. I think he sold it already. gray 24HO

[SULPHITE]

yep thats it...

[cmdrost]

Originally Posted by "W"

I want a 4 stoke yammy....just getting a price with Mercury.....

Get the 24HO with 250 4 stroke yammy!

[Reel Bender]

Originally Posted by "W"

#1 I want a boat no body on our lake has....only seen one so far...#2 I heard that are smooth riding boats and take a good chop.....#3 I like the deck lay out!!! Short guy sides

With as much pooh as you fling, you might want to consider something that blends in with the rest!

["W"]

Originally Posted by Reel Bender

With as much pooh as you fling, you might want to consider something that blends in with the rest!

Back Back Give ME 50Feet

[MERCURY OUTBOARD MAN]

i dont know were you are at but in lake charles there is several 24 high outputs and one Z21 if you need names send me a pm and we can set up a demo i am building 2 more for the guys at hackberry rod and gun we do not offer the flats models anymore we do offer the new 21 cat and we are building the new 24 cat i do not have a cat in la yet so if anyone of yall from there want one i will make a special deal on 2 boats to get some over there i do deliver to la we sell 3-4 of the 21 cats a week they are fast dry and smooth and run were you should not run thanks for the interest in texas #1 built bay boats HAYNIE !

Originally Posted by "W"

Im looking at the 20foot or 21 foot does anyone around here have one? I would like some info before I drive to Texas!!

How much does the 24ft cost?

[MERCURY OUTBOARD MAN]

The plastic lids and cleats are an option we do use fiberglass lids and pull up ss cleats if you want these boats are custom we have right at 200 guides using these boats from baffin bay to lake charles the rougher the water the better they will run the 24 high output with 225 pro xs will run 60-64 mph thats not bad for a 24 ft boat

Originally Posted by laangler

without a doubt, a 200 or 225 will get you a lot better cruise speed not to mention top end. Plus it doesn't have to work as hard as a 150 which will improve mileage. A pad boat like that will not perform right without enough horsepower to lift the nose up.

In some of the pictures i saw some plastic lids and plastic cleats, not sure why they wouldn't just use glass lids and stainless.

One thing about the speckle paint finish inside is that it's much easier to keep looking clean

[MERCURY OUTBOARD MAN]

The z 21 with 225 proxs will run 4 mph over rpm

Originally Posted by all star rod

if you are looking at getting a yamaha go on their web site and look at the test data they have done on boats. Maybe yours was not tested but i am sure you can find one that is pretty close to the weight and hull design of the one you are looking at(haynie). Hard to believe that boat has a weight of 1,350# and rated for a 250hp. The test results/data that yamaha did with the 4 stroke 150/xpress x22bay are pretty dang accurate compared to the way mine runs....fuel ecomony, top speed, speed @ rpms, and plane time. If anything the test data is conservative based on the load weight during the test. I usually have more weight in my boat since i fish three 90% of the time. Also, a 4 stoke can run at higher rpms than a 2 stroke di motor. I bet the optimax has the same range as the hpdi...5,500 rpms compared to a 4 stoke at 6,000 rpms. I bet that boat would fly with a 225 optimax!
I think the 150 yamaha 4 stoke is more than enough motor for that boat...get a jack plate.

[MERCURY OUTBOARD MAN]

Yes HAYNIE is the biggest mercury dealer in texas we are yamaha dealers also the z21 with 150 yamaha 4 strk starts out at $32000.00 pm me and i will tell you what you get at that price its not a stripped down mdl for sure and for the comment on grab rails around windsheild they all come with them we sell so many of these boats its hard to get finished products because everyone is in a hury we sell everyone built in all models Haynie has been the #1 boat in corpus christi area for 2 years check em out you will love them for sure

Originally Posted by all star rod

Good luck going with the Optimax..... I would get a HPDI 200HP in place of that MERC if you are looking with something besides the 4 stroke 150 Yamaha. Does Haynie have an agreement in place with MERC? I guess I am just a Yamaha guy. The only down side of going with the 101# troll motor is the extra battery. I think an 80# is more than enough. But nothing wrong with have too much power.

[Hopedale Hustler]

Originally Posted by LaAngler

the fly by wire verado 350 supposed to be better

the only problem with that is its a Mercury.....mite be just me..but had too many bad experiences with Mercs..

["W"]

That's what I want z21 with the 150 yammy 4 stroke!!!

[Reel Bender]

That is probably too Much boat for a little guy like you maybe you should consider one of these!!!!

[Salty]

Originally Posted by Reel Bender

That is probably too Much boat for a little guy like you maybe you should consider one of these!!!!

Bender, that one's bigger than the one he's got now.