1993 Ford Bronco 4x4

[Bluechip]

I was wondering if someone could refer me to a person that is in the business or side business of doing some interior work on the Bronco. I have a drivers side door cable that is broke so you have to roll the window down to open the door, I would like to get all of the window felt replaced, it's all cracked and makes the windows rattle and just other little odds and ends with the interior.

Once I get those little things completed, I'm going to put some new seats and carpet or vinyl on the floor. I want to turn it into something I can do a little mudding in but also use it to drive on the weekends.

I have a BDS 6 in suspension lift ordered and some 35" **** Cepeck tires ordered. Just trying to get it in order before hunting season gets here. I will slowly be a work in progress. Just looking for someone around the Sulphur/Lake Charles area. Thanks in Advance.

[iron man]

Its a long way out of the way, but Searchers over here in Prairieville is pretty good with their work.

[weedeater]

man spray liner in that thing and be done, had it in a jeep and it was awsome. If you want to get creative spray it and put dimond plate over inside of doors and pull inside moldin out of back and put dimond plate there too, for broken parts that you need to change go to a junk yrd them things are easy to do

[weedeater]

Got a post on here with 35" tires cheap

[Bluechip]

man spray liner in that thing and be done, had it in a jeep and it was awsome. If you want to get creative spray it and put dimond plate over inside of doors and pull inside moldin out of back and put dimond plate there too, for broken parts that you need to change go to a junk yrd them things are easy to do

I haven't ruled out a spray liner. Just looking for someone to do the tedious stuff I mentioned above. I hate messing with that stuff.:shaking:

[weedeater]

[QUOTE=Bluechip;274815]I haven't ruled out a spray liner. Just looking for someone to do the tedious stuff I mentioned above. I hate messing with that stuff.:shaking:[/QUOTE

checked body shop?

[booyagasha]

how bad is it? is it rusted and stuff? if not , it shouldnt be too hard to replace(door panels and stuff) ebay and that shchat and it's cheap and one stop shop. you can almost definitely get a whole new dash if need be. get the right tools (panel popper ) it'and go to town. you'll save alot if you do it yourself.

it's ridiculous what some interior shops charger. especially if they think it's "custom"

[Bluechip]

Its in great shape. Just need all the felt/rubber changed on the 2 front windows and back window. I have replaced all the switches but I'm just not sure or can't understand how to get the glass out to change the felt stripping on each side. Afraid to screw it up.

I have the new weather stripping just not sure about getting the window out to replace it.

[huntin fool]

Check with Body Works on 171 in Moss Bluff..

Best friend's dad owns it..

[Bluechip]

Check with Body Works on 171 in Moss Bluff..

Best friend's dad owns it..

Thanks Fool...I will give them a shout next week. It's a sweet ride 85,000 original miles am/fm cassette...lol.. The interior is perfect except the drivers seat needs to be recovered. AC and heat work good, just a nice ride.

Like I said earlier I'm going to put a BDS 6" lift and some 35's to use on the hunting lease but I also want to pull the top off in the spring and fall and go cruising.

I just would like to change out these window felts because it rattles because they are all cracked up and pieces of it missing.....Thanks for the lead.

[southern151]

Thanks Fool...I will give them a shout next week. It's a sweet ride 85,000 original miles am/fm cassette...lol.. The interior is perfect except the drivers seat needs to be recovered. AC and heat work good, just a nice ride.

Like I said earlier I'm going to put a BDS 6" lift and some 35's to use on the hunting lease but I also want to pull the top off in the spring and fall and go cruising.

I just would like to change out these window felts because it rattles because they are all cracked up and pieces of it missing.....Thanks for the lead.
Give me a call if ya get a chance. I can walk ya through the belt mouldings. They aren't bad, as I recall. It's been a while since I worked on one that old but, they're all about the same from those days

[SULPHITE]

am/fm cassette

hell yeah pop in your favorite mix tape and :rocker:

[Bluechip]

hell yeah pop in your favorite mix tape and :rocker:

Lol...you know what's up.

My son just shook his head when I went and pulled one of my Bad Company cassettes out of the closet and popped it in and cranked it up.

[Bluechip]

Give me a call if ya get a chance. I can walk ya through the belt mouldings. They aren't bad, as I recall. It's been a while since I worked on one that old but, they're all about the same from those days

It will be a week or so before I can mess with it again but I will take you up on the offer. I can take some pics of inside the panel, etc, and email to you for a refresher.

[southern151]

It will be a week or so before I can mess with it again but I will take you up on the offer. I can take some pics of inside the panel, etc, and email to you for a refresher.
Sounds good man! Gimme a call @ 225-647-2772. That's the shop or my cell is 580-716-4995.

BTW, I still own a Motley Crue, Girls, Girls, Girls cassette!:rotfl: The good ol days!

[LPfishnTIM]

stryper, white cross, tourniquet, I got some old christian metal on cassette.