never seem this done so I figured I would

[Patt]

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

[Micah]

How are you going to waterproof your amp?

[weedeater]

There's a YouTube video where a guy has a system in his yak..... every hole has a speaker

[Patt]

its inside of a dry box in my yak and the box is great stuffed to it

Sent from my SAMSUNG-its inaide of a dry SGH-I997 using Tapatalk 2

[Patt]

I didnt wanna get tlo crazy and this is plenty for this project and im also putting whiteed strips inside so itll be easier to see at night

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

[Patt]

got,her done

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

[weedeater]

I like the LEDs, I am gonna order me some for running lights and cockpit lights

[1fastmerc]

If you look on YouTube they have several videos of kayaks with speakers installed.


Sent from my stupid iPhone using Tapatalk

[Patt]

I wanna do some for running lights too and I looked on youtube and I got some ideas

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

[weedeater]

Oznium.com has some pretty cool lights for good prices, I am about to order some

[Patt]

my buddy at kaos atv in sulphur did all mine I dont remember where the leds came from but they are waterproof and are very bright

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

[yakinoff]

I just recently ordered my lights..i got green 5050 leds. a 5m (about 16ft) waterproof strand of 300 lights was only $18 off ebay. patt those lights are nice but do you think they will be a little blinding at night?? i was planning on putting mine on the outside of my yak

[yakinoff]

http://texasfishingforum.com/forums/ubbthreads.php/topics/7813487/LED_s_on_my_Mariner#Post7813487

Check out what this guy did...this is similar to what i would like to do...most ppl put a marine 12v battery...but with the low amount of amps pulled by so little led's im thinkin i am just gonna get 2 small 6v batteries and wire em in series

[Gerald]

http://texasfishingforum.com/forums/ubbthreads.php/topics/7813487/LED_s_on_my_Mariner#Post7813487

Check out what this guy did...this is similar to what i would like to do...most ppl put a marine 12v battery...but with the low amount of amps pulled by so little led's im thinkin i am just gonna get 2 small 6v batteries and wire em in series

Have you considered getting a Lawn mower battery?

[redaddiction]

http://texasfishingforum.com/forums/ubbthreads.php/topics/7813487/LED_s_on_my_Mariner#Post7813487

Check out what this guy did...this is similar to what i would like to do...most ppl put a marine 12v battery...but with the low amount of amps pulled by so little led's im thinkin i am just gonna get 2 small 6v batteries and wire em in series


They make a small 12volt battery just like those 6volt ones. It's the size of two 6volts side by side. Look at academy by the deer feeders and motion decoys.

[BassYakR]

Yeah thats what i use for my depth finder it works great

[weedeater]

I saw on YouTube last night where a guy bought a battery pack from somewhere like radio shack that holds AA batteries and was running his lights with that and he said he should get around 100hrs from it...... on the being blinded part I asw they make water proof dimmer switches for LEDs if needed.

[Patt]

the leds work great and I was a litle worried about blinding me but they dont and I have a 12v from the little cheap chinese fourwheelers and with my speaker and leds goin the leds drop the voltage down a good bit but I dont jam it while fishing.so it wont be a problem

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

[Patt]

I plan on putting green amd blue on the outside and a 10w led spotlight on the bow

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

[Jedi Lure Tricks]

I plan on putting green amd blue on the outside and a 10w led spotlight on the bow

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

Lookin good Patt! I like the customizations you've done. I'll be interested in seeing more pics of your progress as you install the outside lights. A short vid when it's done showing all the lights and jams on would be very cool!

[1fastmerc]

Lookin good Patt! I like the customizations you've done. I'll be interested in seeing more pics of your progress as you install the outside lights. A short vid when it's done showing all the lights and jams on would be very cool!

X2


Sent from my stupid iPhone using Tapatalk