| alphaman |
05-28-2015 04:37 PM |
1 Attachment(s)
Check the fuse. Took the fuse out cleaned it. Touched the wire str8 to the hot post. Nothing got little faint sizzle noise but no movement in the tab motor Attachment 88963 |
| alphaman |
05-28-2015 04:37 PM |
I'll get a tester tonight check it out in the morning
|
| Speck Attack |
05-28-2015 06:03 PM |
Check your switch on the dash... Mine failed on my offshore boat....changed and all good...
|
| alphaman |
05-28-2015 06:30 PM |
Quote:
Originally Posted by Speck Attack
(Post 756576)
Check your switch on the dash... Mine failed on my offshore boat....changed and all good...
|
How do I check the switch? |
| Gerald |
05-28-2015 08:48 PM |
Quote:
Originally Posted by alphaman
(Post 756579)
How do I check the switch?
|
Take a little piece of wire and "jump" the switch [touch the wire to either side of the switch] to see if this will make the trim tabs move. |
| Speck Attack |
05-28-2015 09:35 PM |
1 Attachment(s)
Quote:
Originally Posted by alphaman
(Post 756579)
How do I check the switch?
|
My switch had a visual burned area under the gel pack on the bottom. To me a "smoking gun". See wiring diagram. Basically a 12 volt system, current one way up...current other way down.... |
| alphaman |
06-04-2015 06:23 PM |
Got everything checked out some how the power wire was broken. Its working fine now
|
| All times are GMT -5. The time now is 12:07 PM. |
|
Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted