SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   The Tackle Box (Lures, Baits, Rigs) (http://www.saltycajun.com/forum/forumdisplay.php?f=47)
-   -   cranks (http://www.saltycajun.com/forum/showthread.php?t=27099)

BassAssasin 01-17-2012 08:09 AM

Quote:

Originally Posted by jldsc (Post 377636)
Alright then...put me on the books fosho for 3 1.5 square bills.....no matter the cost after you get caught up with your other people, I dont do the facebook thing so when you ready shoot me a pm and where to paypal the money..

X2

huntin fool 01-17-2012 08:17 AM

Quote:

Originally Posted by SaltyShaw (Post 377652)
I can't get over them mullets dude!! They look awesome, we need a Facebook link you old fart

Wipe the brown off ya nose shaw.

Stan, they going to be on your Facebook page or someone else's

DUCKGOGETTER 01-17-2012 09:11 AM

Look great

Salty 01-17-2012 12:14 PM

1 Attachment(s)
Relax! There ain't nothin' on my FaceBook except the usual FaceBook garbage. I haven't posted on there in months. When I get it cleared out and get the pics posted...I'll let ya know. :smokin:

Here'a a pic of the 1.5 and 2.5. Notice how the belly hook hanger on the 1.5 is rotated coNpared to most cranks. This allows for use of a smaller hook w/o sacrificing hookup ratio. This positioning depends, however, on the manufacturer.

jpeff31787 01-17-2012 12:45 PM

How much would it cost if I get whatever kind of setup your using to paint these things? Frikin awesome paint jobs!! If you ever really plan on selling some of those, I promise I can keep you busy

Salty 01-17-2012 12:58 PM

Quote:

Originally Posted by jpeff31787 (Post 377779)
How much would it cost if I get whatever kind of setup your using to paint these things? Frikin awesome paint jobs!! If you ever really plan on selling some of those, I promise I can keep you busy

You can buy an airbrush for cheap at Harbor Freight ($7-10), but, I would recommend at least an entry level Iwata or Paasche to begin with. If you have artistic skills (which I don't) maybe you should step up to a better gun. You'll need an air compressor with regulator (unless your airbrush has one) and a moisture trap is very important. Your clearcoat of choice and the paint is about it. I use Devcon 2-ton epoxy to seal the lure and Dupont Chroma automotive as a finish.

SaltyShaw 01-17-2012 01:39 PM

Quote:

Originally Posted by huntin fool (Post 377657)
Wipe the brown off ya nose shaw.

Stan, they going to be on your Facebook page or someone else's

No brown nosing here just commenting on a job done well they really do look awesome you know it young tunechi

jpeff31787 01-17-2012 03:21 PM

Quote:

Originally Posted by Salty (Post 377787)
You can buy an airbrush for cheap at Harbor Freight ($7-10), but, I would recommend at least an entry level Iwata or Paasche to begin with. If you have artistic skills (which I don't) maybe you should step up to a better gun. You'll need an air compressor with regulator (unless your airbrush has one) and a moisture trap is very important. Your clearcoat of choice and the paint is about it. I use Devcon 2-ton epoxy to seal the lure and Dupont Chroma automotive as a finish.


Whats the moisture trap and where do you get your paint? I use to have artistic skills lol stop trying to act like you don't btw!! Frikin baits are sweet as hell and I have no clue how you got them too look that good, but I shall have fun trying

Salty 01-17-2012 03:29 PM

Quote:

Originally Posted by jpeff31787 (Post 377882)
Whats the moisture trap and where do you get your paint? I use to have artistic skills lol stop trying to act like you don't btw!! Frikin baits are sweet as hell and I have no clue how you got them too look that good, but I shall have fun trying

Until a few months ago, I had never even been in the same room with an airbrush. Truth.

The moisture trap hooks inbetween your compressor and airbrush. It'll trap the moisture that is produced by your compressor...keeps it out of your hose. Nothing worse than spraying the clear coat on a finished lure and here comes a blob of friggin' water. :pissed:

Flatfishfreak 01-17-2012 05:55 PM

Man those cranks look awesome

Sent from my PC36100 using Tapatalk

Salty 01-17-2012 07:55 PM

1 Attachment(s)
5" Sammy and silver-plated Mega Bass 110

huntin fool 01-17-2012 08:00 PM

The sammy is the tits. Hopefully you ain't forgot about your welcher buddy back west.

Salty 01-17-2012 08:03 PM

Quote:

Originally Posted by huntin fool (Post 378054)
The sammy is the tits. Hopefully you ain't forgot about your buddy back west.

Kade?

SaltyShaw 01-17-2012 08:05 PM

Bling bling nickels!!

Salty 01-17-2012 08:07 PM

You could put any color on the back of that Mega Bass and you'd have an instant fish catcher...bass or trout. Maybe a chartreuse belly and a lil urnge under the throat.

SaltyShaw 01-17-2012 08:16 PM

I ain't hatin! I like it matches my grill

huntin fool 01-17-2012 08:17 PM

Quote:

Originally Posted by Salty (Post 378058)
Kade?

That's dirty

Salty 01-17-2012 08:19 PM

Quote:

Originally Posted by huntin fool (Post 378071)
That's dirty

Well, I knew you wasn't referrin' to "W". :rolleyes: Plus, damn near everybody here is "back west". :)

huntin fool 01-17-2012 08:23 PM

Quote:

Originally Posted by Salty (Post 378072)
Well, I knew you wasn't referrin' to "W". :rolleyes: Plus, damn near everybody here is "back west". :)

I feel like I've been replaced. It's whatevs.

:(

Salty 01-17-2012 08:25 PM

Quote:

Originally Posted by huntin fool (Post 378075)
I feel like I've been replaced. It's whatevs.

:(

No way! :shaking:


All times are GMT -5. The time now is 05:02 AM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted