sausage stuffer
 

Where can I buy a sausage stuffer near lafayette?

you can try this place:

Meaders Kitchen Equipment Inc
602 SW Evangeline Trwy
Lafayette, LA 70501-8299 [SIZE=1
Lafayette, LA Metro Area

http://www.meaderskitchenequipment.c...appliances.htm


If you just want a hand crank one Academy sells those.

Hand crank vertical tube. Just for a few deer a year.

Guidry hardware in Scott is where I would start my search, if they don't have it no one will.

Acadamey has em .

LEM is a good quality product. Try to get the 15 pounder since it is a hassel to use the 5 pounder. Once you get started you have to stop and refill canister. A few deer will turn into alot of friends deer later. Its fun get together after the season. I started doing only 100 pounds for me and 3 years later im doing over 800 pounds for friends.

definately get a good one. I had a cheap one and cussed every time i used it. I ended up making a water pressurized one out of pvc.

NORTHERN TOOLS HAS ONE FOR $79 ON SALE. I grind several deer a year, make sausage and boudin. I have had several cheap electrics and hand cranks( they suck unless you have several friends to help). The electric one from Northern tools normally runs about $129. It will grind a deer as fast as you can cut it from the bone and feed it. Gristle, ligamnets and all. Shipping is usually pretty fast. I don't think you can go wrong with it for a home grinder.

http://www.northerntool.com/shop/too...ct_36989_36989

:smokin::D

My friends don't kill deer.:D:smokin:

you right:(

But Bryant does!!!!!!!!!!!!!!!

i would like your boudin recipe please?

Craigslist has a wide variety of sausage stuffers.....

True! Better get the big one.

:*****::*****: You just ain't right!:shaking:

I knew this thread was destine to go sour, what do you expect when the title is sausage stuffer!:rotfl:

CABWIZ2
 

How do you make a sausage stuffer out of PVC??

I would like to know that how that PVC stuffer is built and how much is the cost of the project. I might try to build one for feb when the stuffing begins!!

Here are a few pics of the one I made.

Is the air connection threaded into the pipe? Where did you get the top piece with the o-ring? Did you fab the solid piece that is screwed into top piece? How do you keep the air from bypassing the sausage? Thanks

Damn Shane!! That's cool!!

It is water that pushes the sausage. I fabbed the top piece and the piston and bottom plug out of 1" starboard. (ebay by the sq foot) the piston is doubled with an oring in each piece and the pvc is tapped into the starboard.

Lucas stuffs a mean sausage

And you know this how?

They were stuck on a mud flat with nothin else to do......