Quote:
Originally Posted by scott craft
I'm running a 14 pitch powertech reb. I believe it has some cup from the factory. Turning it 4500 rpm.
I'm running a jack plate with 7.5 inches of setback. Cavitation place is between 1-1.5 inches above the boat bottom. I'm taking it to a friend's house tomorrow. He's got a neighbor that's pretty familiar with suzuki's. I'm going to let him run it and check the setup and see what he thinks about it.
|
That is one problem for sure....that motor should turn 5500 rpm's at WOT. On another note that motor should not have a problem turning 5500 rpm's with a 14 pitch.