Thread: Reel Cleaning
View Single Post
  #13  
Old 07-11-2012, 11:09 AM
coastalobsession coastalobsession is offline
Redfish
 
Join Date: Nov 2011
Location: Matagorda
Posts: 183
Cash: 808
Default

If wading and not dunked.... every 2 trips
Other than that about every 4 trips

It take all the parts out and get all the old grease and oil off of the frame/parts/sideplate/bearings.
I clean all the parts with Simple Green except with the brass gears which get CLR and later polished.

I blow the bearings out with carb cleaner and heat them up and clean them again. Once clean and spin freely I oil with royal purple.

The frame gets a LIGHT coat of Yamaha Marine Grease along with the Brass gears and screw holes.

The nylon gears get royal purple oil along with worm gear.

The roller clutch bearing get a drop of royal purple.


On the newer Shimano bait casters I can get a average of a 50sec free spool with standard bearings.
Reply With Quote