It's a 2 stroke and I'm puttting my jackplate today, yes the boat is 15 ft 5 in x 54 in all .125" 11 degree at bow and 6 degree at stern although it has 12in pad. I have a buddy that has a boat shop and tons of props that fit my motor from 12 pitch to 17 i can use them as needed to test it, i'm thinking lifting it will help quite a bit we shall see, I do appreciate all the feed back i just don't want to lose any speed, i knew getting this would sacrafice some i was crusing at 36 on flat about 4700 rpm right now WOT is 36 at 5100, thats full load on light load i get 5500.
|