Quote:
Originally Posted by hawgsquatch
If you look at you most fried piston you can see how the top has been pockmarked and eroded away. That is a sign of pre-detonation. Basically, it is caused by the gas oil air mix exploding rather than burning rapidly. It is usually caused by low octane fuel, but can be caused by advanced ignition timing. If that was the case the lower crank bearings are likely to be beat to death and new pistons will last right up until one of the cages spits some hardened bearing race into the combustion chamber. Check it out before you invest.
|
Yeah but u cant see in the pictures that there are no signs of detonation on the tops of the piston itself. I think what ur seeeing on the tops of the cylinder is from a previous rebuild.
Sent from my SPH-L710 using Tapatalk