MudHole will kill you with the shipping, as already said. But they have everything.
You can get your drier motor and rod chuck off ebay for cheap.
You can make your own rod wrapper out of scrap wood or even a card board box. You can also use mouse traps for your thread tensioners.
Advice:
1) Do
not buy a "kit". Buy the individual components separately.
2) Get a drier motor that turns about 5 - 6 RPMs/minute. And turns both clockwise and counterclockwise.
3) Work in a clean, dust free environment
4) Be patient, and take your time.
5) Do your homework, and read
http://www.rodbuildingforum.com/
6) Get a quality blank and components. I really like the MHX blanks.
Its a good feeling to catch fish on a rod that you made!!
Good Luck