Thread: Boat flooring
View Single Post
  #7  
Old 05-11-2014, 01:51 PM
keakar's Avatar
keakar keakar is offline
Red Snapper
 
Join Date: Sep 2012
Location: Laplace
Posts: 1,869
Cash: 1,902
Default

Quote:
Originally Posted by marshrunner757 View Post
Any type really. Just would like a decent looking finish at a decent price.

Sent from my SAMSUNG-SM-G900A using Tapatalk
then do the restore deck coating from home depot http://www.homedepot.com/p/Restore-2...6029/204005162

its easy and you have like 30 colors to pick from they mix for you right there on the spot.

I did my 17ft flatboat with it and it took 2 1/2 gallons so for your boat you might need 2 of the 2 gallon kits.

it has a non skid finish that's rough like concrete and you just paint it on with a brush in tight spots or use a roller (included in the kit) for larger areas.

it wont stick to bare metal so on metal it needs a primer coat to stick but on fiberglass just pressure wash it clean so no mildew or anything is left and sand it good before painting so it sticks well.

this is how my boat turned out: http://www.saltycajun.com/forum/album.php?albumid=601

I will caution that if you decide to use it, I was very careful but the roller still slung specks all over so even going slow it will get on everything near it that you don't cover up
Reply With Quote