Quote:
Originally Posted by fishfighter
i have seen aluminum hulls start to bend over time when there is no support on that part of the trailer, it may not be the case with the bow support on the wench, but you do need to support more of the bottom of your boat, longer bunks that rise in the front or some sort of riser right there
|
Great advice! I'd add a "V" style roller That will attach to that cross over support near the front of trailer. This will start to raise the bow as soon as the boat slides on to the V roller. Dropping the bunk boards at the back of trailer will help but better to raise the front bunks to a higher angle.