Quote:
Originally Posted by marshrunner757
Didn't run tubing, just pulled wire under the ribs. Pulled one extra pair of wires and also a stainless pull wire for future.
|
the 1/2" seal tight plastic flexible conduit will fit inside the rib gaps and sometimes you just need to bend the edges up slightly to get it in but its the best way. if you ever need to rerun the wires they will not follow the groove so it could be an issue if you cant pull the new wire by using the old wire such as adding something new or replacing a cut or shorted separated wire.
just something to think about before it gets sealed up.
I also used the sides to run the wires through to keep them out of the salt bath all the time to reduce corrosion concerns as well as keep maximum channels for drainage in case a few passages get clogged up under there..