If you want to only boil all you need is a pipe with cap and a hole drilled in cap.....Elbow the pipe out and go to home depot and get the size clear plastic line they sell and a hose clamp to clamp it to pipe and to existing gas line...Of course you need a gas valve at the end of your existing gas line to adjust pressure....If you want to cook you better off with a burner but if you put a flat plate under the pot on a pipe burner it works ok....You can swap out the burner with all the nozzles but I don't think a home line has enough volume....Maybe with propane....I personally used this at this store and it is hotter than propane but he also has a 1-1/2 to 2 inch gas line coming in , I don't remember....Nat. gas is cheaper than propane....We run 2 nat. gas burners inside and 2 propane outside for fishfrys and the propane use a tank each after 2 fry's while the nat. gas uses 15-20 dollars for 7 fry's.....
|