Quote:
Originally Posted by fishinpox
First off start by removing all that attic decking , if you want it decked fir up the ceiling joists to make a deeper cavity for r 38 then deck over it. Add some power vents to your roof . This is where you will notice your biggest difference . I'm assuming you are leaving the exterior veener ( brick , stucco, siding etc) and sheating? You could seal along every stud cavity with a foam or caulk then get a blown fiberglass in the stud bays .
|
thanks for the advice
is it better to do a crossing pattern with one layer of r19 between the joists and another layer of r19 laying on top going across them to get r38, or just go with a single thick r38 bat?