Quote:
Originally Posted by wishin i was fishin
Network, actually doesn't have anything to do with it. If your bow unit works at both locations, and your console unit works on neither, then the problem is in the console unit.
If you can not successfully do a hard reset on the console unit, then it will have to go to the factory unfortunately.
you will need to bump up the fuse on your console/lss1 power lead to at least 6 amps, 10 amps max.
Here are the reset directions just in case.
|
Sure it does, it's power over Ethernet. The HDS uses the data cable for power also. Thus, power is supplied from the network, bow unit works, console does not. The problem is in the console unit main circuit board.
Sent from my iPhone using Tapatalk