|
The Tackle Box (Lures, Baits, Rigs) Discuss everything related to tackle here, including making your own |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Rod tip replacement help
|
#2
|
|||
|
|||
The tube size is most likely a 5 or 5.5 on the spinning and a 6 on the casting. My best guess. If you get around Moss Bluff I can fix u up.
|
#3
|
||||
|
||||
There is no standard.
I have some, if you come this way. Anyone repair them in Leesville? |
#4
|
||||
|
||||
yep, seams every rod has a little different thickness tip even with the same brands so every time I get the assorted pack and try the different sizes till I get the best fit (usually between the small or medium small size)
|
#5
|
|||
|
|||
Tube sizes for rod tips are in 64th's of an inch . . . a size 5 is 5/64's, etc. If you have a complete set of drill bits you can remove the old top and use a bit to estimate the size of the tube or you could use calipers to measure the tip of the rod after the top is removed. Also, half sizes of tips are available between 4 and 7.
|
Bookmarks |
|
|