|
Boating Talk For discussion of everything related to boats and motors |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
On/Off hull cleaner
|
#2
|
||||
|
||||
2 coats of wax is what I put on my boat.
|
#3
|
||||
|
||||
Aight thanks chug
|
#4
|
||||
|
||||
I would say at least two.
|
#5
|
||||
|
||||
Thats what i was told, rather have enough and no brown than have to redo it..lol.
|
#6
|
||||
|
||||
I hated doing my Kenner . If you could get it off the trailor and up higher it wouldnt be as bad.
|
#7
|
||||
|
||||
Ye sides are cake botom is a ..... , pain in the butt...i only wanna do it twice a year under there not every other week, better do it right the first timee....lol.
|
#8
|
||||
|
||||
Would be nice if you could just flip it over and do the bottom..
Make sure you use a good soap to wash it between waxes ,some soaps take the wax off . |
#9
|
||||
|
||||
Gotcha
|
#10
|
||||
|
||||
kenner when did you sell your kenner, buddy of mine has a 22 ft kenner..did you like it...
|
#11
|
||||
|
||||
I sold it in march of this year. I loved it ,but it was one of the real kenners before they sold out to bass pro. Im looking for another one now. I think the ones after 2000 are the bass pro versions. I have herd mixed reviews on those models .
|
#12
|
|||
|
|||
Hull cleaners BADD
Hull cleaners are bad they hurt the gelcoat dont get me wrong they work great if you must use a hull cleaner you should go back over with 3m high gloss compound and put atleast two coats of wax other i work in a fiberglass boat repair shop people come in with stained hulls all the time
|
#13
|
||||
|
||||
Quote:
|
#14
|
|||
|
|||
Some times soap and water a scrub brush and some elbow grease if that dont work than compound with a scrub brush this is for texture onlyyy if its on smooth then just us soap and water it
|
#15
|
|||
|
|||
What is the best Cleaner/soap to use for inside of boat.
|
#16
|
||||
|
||||
Softscrub works great on stains, its like a compound w/bleach. Been using it for a 10 years on my pathfinder, its got a textured covering on the decks and floors. Hell it even takes spike-it dyes off.
|
#17
|
||||
|
||||
Hull cleaner?
Quote:
|
#18
|
||||
|
||||
Just a word of caution, after you put the first coat on, put just a small area with a second coat and see how hard it is to get the haze off.
I made the mistake once of putting on a coat of 3M wax once, then decided to do a second coat. After I covered the whole boat with the second coat, I like to never got it off. Sometimes one is enough, then cover with a teflon polish to cover the wax. |
#19
|
||||
|
||||
There is a real good non-skid deck cleaner at Walmart in a dark blue bottle. Attwood is the brand. I hate Walmart and never really cared for Attwood products cause they are usually cheap, but found this stuff by accident. It works great for non-skid.
|
Bookmarks |
|
|