|
Inshore Saltwater Fishing Discussion Discuss inshore fishing, tackle, and tactics here! |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Hydro Turf Installers
Any thoughts? |
#2
|
||||
|
||||
Hydro turf is great! I done my boat with it and it is very comfortable and skid resistant. Not sure how much detail cutting you have, but take your time and do it yourself. Rolling pin is the ticket. Just make sure it's where you want if before you roll it. Once it's stuck, it's stuck.
Sent from my SAMSUNG-SM-G930A using Tapatalk |
#3
|
||||
|
||||
Cajun Camo in Abbeville installed mine
|
#4
|
|||
|
|||
Do it yourself, use acetone to prep surface, use blue painters tape to lock the foam in position, then peal the backing off in small sections and stick and press.
Sent from my iPhone using Tapatalk |
#5
|
|||
|
|||
I took the advice of my fellow salty Cajun members and installed the hydro turf myself. Came out ok. Wish I could cut better but overall I think it's going to serve its purpose.
|
#6
|
||||
|
||||
Pics? Mine isn't perfect either but this stuff is nice. Congrats!
Sent from my SAMSUNG-SM-G930A using Tapatalk |
#7
|
|||
|
|||
I installed under my hatch lids for help sealing and noise reduction. I cut it all with a straight edge and razor. Used a router and cove bit to shape edges.
Sent from my iPhone using Tapatalk |
#8
|
|||
|
|||
where did you guys purchase the turf from? my boat currently has carpet, but im wanting to rip it out and put down hydro turf.
|
#9
|
|||
|
|||
Couldn't post from my phone so I had to get to a lap top. The before and after pics should be attached. I ran the hydro turf along the top rails of my boat.
I bought the hydro turf from them directly. I got a roll for less than $130.00 total with shipping. I paid extra for the adhesive backing and the larger roll. |
#10
|
|||
|
|||
Quote:
I should of said my Wife and I were able to get this installed. She actually did most of the prep work and without her I wouldn't of been able to get this done. Installing Hydro turf like we did was definitely a 2 person job. |
#11
|
||||
|
||||
Quote:
Sent from my SAMSUNG-SM-G930A using Tapatalk |
#12
|
||||
|
||||
Lancer, you'll be wanting it throughout the boat before long. That stuff really saves my feet and back because I stand the entire time.
Sent from my SAMSUNG-SM-G930A using Tapatalk |
#13
|
||||
|
||||
How about cleaning? How does it hold up to the pleasure washers (car wash)? Has anyone had any issues with cleaning off blood or fish slime from it once it has been sitting in the sun for a couple of hours? I have a bad habit of when the fish are biting good, I do not clean off the boat every time I get some blood on the deck or slime, I will wait till the bite slows or even at the end of the day when I run it through the car wash.
|
#14
|
||||
|
||||
Quote:
Sent from my SAMSUNG-SM-G930A using Tapatalk |
#15
|
|||
|
|||
Quote:
If you want it to look really sharpe go order a sea deck template kit and follow the you tube video. 6-8 week turn around time for sea deck to cut out the patterns. Go with hydro turf if you don't mind the looks. The big problem with hydro turf is there sheet material is not wide enough. I call the folks directly and they said that large sheet is the widest made. |
#16
|
||||
|
||||
Quote:
Sent from my LG-V495 using Tapatalk |
Bookmarks |
|
|