|
|
|
|
|||||||
| Boats, Outboard Motors, Kayaks, Etc Post ads for boats, kayaks, canoes, and outboard and trolling motors here |
 |
|
|
Thread Tools | Display Modes |
|
#1
09-22-2012, 05:51 PM
|
|||
|
|||
New 2 Bank Dual Pro battery charger
SS2 Sportsman Series  $239.99 SKU: PCS SS2 Qty:   SS2 Two 10 Amp Banks 20 Amps 4.75”H x 8.00”W x 9.25”L 10.88 lbs. 12V Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. Battery Charging System Designed for Use On Land and in Fresh and Salt Water • The ”Green” Charger: Totally “Repairable” Not a Throw-Away • Unmatched Performance, Reliability, Safety and Quality • TROUBLE FREE—Just Plug It In and Forget It! • Join Over 750,000 of Our Satisfied Customers! • Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Features of the Sportsman Series Battery Chargers: • Approved for Wet Cell and AGM batteries • Models also available for Gelled Electrolyte batteries • Designed for use in fresh and saltwater • Dependable, rugged construction • Waterproof • Independent outputs • Fully automatic / multi stage charging • Zero spark technology • Battery maintenance mode • On-board diagnostic codes • Temperature compensated • Advanced microprocessor controlled • Battery systems available: 12V – 48V • LED lights indicate the state of charge • Reverse polarity protected • No installation restrictions • FCC Parts A & B interference compliant • DC charge cables = 5ft. AC power cord = 3ft. • approved and meets ISO 8846 Marine standards • Ignition protected (US Coast Guard 33 CFR 183.410) Product Specifications SS1One 10-Amp Bank10 Amps4.75"H x 8.00"W x 6.38"L5.50 lbs.12VSS2Two 10-Amp Banks20 Amps4.75"H x 8.00"W x 9.25"L10.88 lbs.12V, 24VSS3Three 10-Amp Banks30 Amps4.75"H x 8.00"W x 11.25"L15.50 lbs.12V - 36VSS4Four 10-Amp Banks40 Amps4.75"H x 8.00"W x 14.25"L22.20 lbs.12V - 48V |
|
#3
03-02-2013, 01:05 PM
|
|||
|
|||
|
Quote:
Still in an unopened box. 337 855-0091 Moss Bluff, La. |
|
| Bookmarks |
|
|
Linear Mode
