|
Offshore Fishing Discussion Discuss everything bluewater from pelagics to reef fish here! |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Introducing "Sweetass"
The interior and electronics of the 31' Contender are mint condition. However, this boat was purchased by a guide in Venice to use as a spill response boat and stayed in the water down in Venice during the BP thing. Once it was out, they used an acid to clean the hull and really trashed it. He got a great deal on it, so he is removing all the old pale blue curtains/top, gonna remove the old nasty blue anti-fouling paint bottom, and have the outside redone. We are going to re-do the bottom in Razorback red, water sand the white and top cap, then polish, then install new red top canvas and red decals. The boat came with everything but tackle as the guide is going back to inshore only charters. The trailer is going in Friday morning to have 6 new tires, all bearings and seals replaced, brakes checked, and during the summer we will probably media blast and clear coat while the boat is being used. Came w/ 3 outriggers and 2 Cannon downriggers, 2 VHF, Sounder, GPS, and Radar, full curtain package w/ side sheilds, anchor and rope. It was purchased in SC w/ 304 hours on it, we picked it up w/ 633hrs. Also had a 3 ring binder from SC for all maintenance that was done on boat while owned by 3 elderly men. Can't wait to see it all shined up. |
#2
|
||||
|
||||
It definitely has potential. That is a lot of fiberglass.
Take some pics when y'all get it remodeled. |
#3
|
||||
|
||||
Will do! His plans are to run these old 250's one more summer, then go to 300 Yammy 4 strokes next year!
|
#4
|
||||
|
||||
nice boat... cant wait to see it after its all fixed up
|
#5
|
||||
|
||||
Nice. Gonna be a great summer.
|
#6
|
||||
|
||||
He's got a lot of plans !!!! Hope he's got a good job!!!!!
|
#7
|
||||
|
||||
x2, I'm just hoping I'll be able to afford to run my boat!
|
#8
|
||||
|
||||
That's a weirs special right there! That's lot of cleaning & waxing!!!
|
#9
|
||||
|
||||
Finesse It. It is a polish/wax that you put on with a buffer.
It takes the dull chalky stuff right off and makes it shine. No hard rubbing. Not sure if I spelled it correctly. |
#10
|
||||
|
||||
man them motors gonna suck up that fuel better get them four strokes soon gas is going up.
|
#11
|
||||
|
||||
Did I mention he needed to spend some money before Uncle Sam got it. Trust me fellas, he could have bought a new one! His address is "Hal Sutton Drive - Haughton, La" if that gives you any indication!!!!
|
#12
|
||||
|
||||
Haynesville shell money?
|
#13
|
||||
|
||||
Nope, he owns a company w/ 2 other guys that have 11 sub companies, all pushing business to each other in the oilfield.
|
#14
|
||||
|
||||
second home?
Quote:
Looks like it'll be a fun project...it'll be sweet with those 300's |
#15
|
||||
|
||||
I was wondering who that big rig was for.
|
#16
|
||||
|
||||
Venice Marina used to have a Contender dealership there.
At one time, that was about all the outboards that ran out of there. |
#17
|
||||
|
||||
I saw it at Olmsted Shipyard today getting polished and waxed.
|
#18
|
||||
|
||||
Dang Ray, your fast!!!!!!!!!!!!! I just dropped it off today at noon. Was any work being done on it when you saw it? Also, Max sure seems to know his stuff on boats! The old place has been around for years, and it was several years since I have been. Asked today when they opened, and was shocked to hear 1938.
|
#19
|
||||
|
||||
There was one guy polishing it. Half of the crew has been sick the past few days.
Max is a master at fiberglass work. Good people. I saw it around 2 pm today. I had some scratches and gelcoat chips on my 30 year old Chris Craft and they matched the old gelcoat perfectly. Polishing and waxing is an easy job. They usually have 10 or more boats in line for major fiberglass work. If'n I got there earlier, I would have been able to meet you. Maybe next time. Their dad opened that business when he got out of the Navy. |
#20
|
||||
|
||||
Quote:
Not trying to be rude or arrogant Just saying And yes they do great fiberglass work They just finished working on mine |
Bookmarks |
|
|