|
The Tackle Box (Lures, Baits, Rigs) Discuss everything related to tackle here, including making your own |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Picking a Rod
HOW DO YOU PICK A POLE? The Penn poles I use are about 80$ but I have picked up 40$ poles and 240$ and couldn't feel the difference. The things I look for are construction, how well the eyes are made, how well they are attached, are they straight, how flexible the pole is, not to stiff, not to soft. How it feels when slinging it, how well the grips are attached and what they are made of (just me but I prefer cork) one piece or two, I don't use 2 piece poles. I look at how the reel will attach, nothing worse the a nice feeling pole, and the reel mounting is crap. what are your eyes looking for in a pole? |
#2
|
||||
|
||||
those $40 penn rods at wallyworld are total crap, they break everytime you hook onto a red with em.
my neighbor went through 4 of em in 3 weeks, 2 on one trip penn isnt the same quality I used to think they were |
#3
|
||||
|
||||
well if you couldn't feel a difference, you must have grabbed a crappy 240 rod, because usually the difference is crazy. Maybe next time try fishing with a 40 versus a 240, you'll know the difference lol
Stick to Fuji components, and you won't complain for reel seats and eyes. Don't but a duckett ghost incase you were looking. They are light and have good sensitivity, but you'll wear down those eyes. I have grooves in mine that have cut my line, which is not fun when throwing $9 dollar baits. Mine is sitting in the garage with no reel, it'll probably waste away right there too |
#4
|
|||
|
|||
I agree on those. the Penns I have came from my local fish/tackle shop now that I looked them up they were 93$ caught many reds on em I don't buy any gear from hell........... or I mean walmart
|
#5
|
||||
|
||||
Quote:
http://www.tacklewarehouse.com/Ducke...page-DTXC.html |
#6
|
||||
|
||||
Quote:
|
#7
|
||||
|
||||
I'm not sure what it came with, but I'd imagine they would be the same. Get ready, they will wear lol I used mine for double rigs for trout and traps for bass, that was it. Caught the hell out the trout with it for a while, and that's what seemed to do it. I wasn't even using braid.. can't imagine what braid would have done to it.
|
#8
|
||||
|
||||
Quote:
I don't see how you could wear out a metal guide but I will peep when I get home for any wear. |
#9
|
||||
|
||||
Quote:
That's them! They would cut my line lifting a 14" trout into the boat sometimes. Reason why I stopped using it. Sent from my iPhone using Tapatalk |
#10
|
||||
|
||||
Hmmm I've caught a ton of bulls on it and big Jacks. All braid no problems yet.
|
#11
|
||||
|
||||
Don't use it that much only when trout fishing with live or chunking baits for reds.
|
#12
|
||||
|
||||
Mine wore out the guides and started cutting the line too. I was using braid though. They use some kind of hard chrome insert.
|
#13
|
||||
|
||||
dang.. consider yourself lucky lol
|
#14
|
||||
|
||||
I could get by with 4 rods for all my speckled trout and redfish fishing.
A 7 foot medium light spinning rod for popping corks. 30 lb braid. Fast action tip to pop all day. 7 foot medium casting rod for 1/16-1/4 oz jigheads tight line, rattle traps, mirrolures, small cranks and top waters. 12 lb mono. Smooth parabolic action to keep those trout lips whole. 7 foot medium heavy casting rod for big topwaters, spoons, rattle traps, mirrolures, 3/8 or 1/2 oz jigheads. 15 lb mono. A little heavier for those larger lures. 8 foot medium spinning rod for sliding corks and bottom fishing. 40lb braid ( so I can outcast and annoy my partner lol) I've since added a dedicated crankbait rod bc I love cranking reds but in all honesty I could make do without it. It's more of a convience thing having everything already tied up and not having to stop and retie. |
#15
|
|||
|
|||
Good components are important. It's hard to go wrong with Fuji guides and reel seats. If you're rough on your equipment, consider double foot guides. The rod should have enough guides so the line follows the rod when loaded without any real sharp angles through any of the guides.
I like a rod that balances well with the reel I'll be using . . . slightly tip heavy for tip down retrieves, and slightly butt heavy for working a topwater. Rear grip length is important. Too long and it can get caught in your shirt or rain jacket; too short and it is hard to brace against your forearm when fighting a bigger fish. |
#16
|
|||
|
|||
Quote:
|
#17
|
||||
|
||||
I only use Ugly Stixs. I had one issue when the line rapped around the tip the same time a jack cravelle decided to go ape **** over my lure and well as you would figure, it destroyed my rod, BUT... Ugly Stix sent me a new rod shortly after contacting them. I use the G2X medium action 6' rod for trout and redfish.
|
#18
|
||||
|
||||
What are your poles now (actions and length)?
What do you want to do with your new rod? |
Bookmarks |
|
|