Haynie 24 HO Motor

[ckinchen]

I am looking at ordering a new Haynie tomorrow. What is the board’s general thoughts on this boat and the following engine options:

Yam - 300 offshore 4 stroke
Merc - 250 Optimax
Merc / Verado - 275 4 stroke
Merc / Verado - 300 4 stroke
Yam - 250 SHO 4 stroke (this one has a 20 inch shaft and most folks say to stay away from it with a Haynie)

Speed, dry ride and a reliable motor are important to me.

[mikedatiger]

Originally Posted by ckinchen

I am looking at ordering a new Haynie tomorrow. What is the board’s general thoughts on this boat and the following engine options:

Yam - 300 offshore 4 stroke
Merc - 250 Optimax
Merc / Verado - 275 4 stroke
Merc / Verado - 250 4 stroke
Yam - 250 SHO 4 stroke (this one has a 20 inch shaft and most folks say to stay away from it with a Haynie)

Speed, dry ride and a reliable motor are important to me.

I was told to stay away from the verado on that boat... The group that I spoke with said either optimax or the SHO.

[ckinchen]

Originally Posted by mikedatiger

I was told to stay away from the verado on that boat... The group that I spoke with said either optimax or the SHO.

I heard the SHO would not work on that boat becuase it is a 20 inch shaft. I really would hate to go back to a 2 stroke again.

[Montauk17]

I would get the new yamaha offshore 300. Same powerhead as the SHO with more power and the 25" shaft. DO NOT buy a verado.

[ckinchen]

Originally Posted by Montauk17

I would get the new yamaha offshore 300. Same powerhead as the SHO with more power and the 25" shaft. DO NOT buy a verado.

Thanks for the input. I saw an 24 HO at the boat show with the 300 offshore on it. I would guess that boat would probably get close to 70mph?

[Montauk17]

Originally Posted by ckinchen

Thanks for the input. I saw an 24 HO at the boat show with the 300 offshore on it. I would guess that boat would probably get close to 70mph?

65mph for sure. What is nice is you would be able to cruise at 45 or 50 and get good fuel mileage. I work for a merc dealer,but I prefer yamaha

[ckinchen]

Originally Posted by Montauk17

65mph for sure. What is nice is you would be able to cruise at 45 or 50 and get good fuel mileage. I work for a merc dealer,but I prefer yamaha

It is not as heavy as the Verado's either, only around 560lbs.

Do you know if I can get electronic controls for the yam offshore motors? My 300 Suz has electronic controls and I really like being able to put the throttle down and not deal with it again.

[Montauk17]

Originally Posted by ckinchen

It is not as heavy as the Verado's either, only around 560lbs.

Do you know if I can get electronic controls for the yam offshore motors? My 300 Suz has electronic controls and I really like being able to put the throttle down and not deal with it again.

Yes yamaha has the fly by wire controls for that model,and they are very nice.

[fishinpox]

Originally Posted by ckinchen

Thanks for the input. I saw an 24 HO at the boat show with the 300 offshore on it. I would guess that boat would probably get close to 70mph?

22ft blackjack w 300 verado 69mph im sure even thought that haynie is 2 ft longer than the bj its a rolled edge boat which is lighter im sure with a yammy 4 stroke offshore 70+ in that boat . when i buy my blackjack i will put the yammy 300 4stroke on it

[Jordan]

CK, my uncle has the F250 with the digital contraols.... REAL SMOOTH !!!!!

[ckinchen]

Originally Posted by Jordan

CK, my uncle has the F250 with the digital contraols.... REAL SMOOTH !!!!!

I have heard that they ride great. I am going to over to Chris Marine in south Texas tomorrow and take a test drive.

Do you know what his top speed was with that setup?

[Jordan]

he has a 24' skeeter bay boat.... with the F250 with digital controls, he gets about 57 top speed and 36-39 cruising...(his numbers, not mine) i rode in it, it had awesome throttle response and alot of gitty-up

["W"]

Merc - 250 Optimax

[Montauk17]

Originally Posted by "W"

Merc - 250 Optimax

Enjoy it while you can,they wont be around much longer. Yamaha is the best motor on the market,like it or not.

[jlincecum]

Big as possible!!!

[PaulMyers]

When you go see Chris tomorrow, just ask him. I'm sure he has numbers for every combination. You can think of. Even tell you the best prop setup.

["W"]

My Opti 225 goes 60mph easy and tops out around 64mph


If you put a 250x your looking at 72-easy

[cmdrost]

I used to fish out of one that had 250 suzuki. It topped out at 61 or 62. No way does the 250 opti give you 72!

My personal opinion is you can't go wrong with any of the 5 you have listed. With the SHO, you just need a big jack plate that they will mount a little lower to compensate for the 20" shaft. You'll prob have to play with it alot more that you would the 25" shaft motors, but thats up to you.

["W"]

Originally Posted by cmdrost

I used to fish out of one that had 250 suzuki. It topped out at 61 or 62. No way does the 250 opti give you 72!

My personal opinion is you can't go wrong with any of the 5 you have listed. With the SHO, you just need a big jack plate that they will mount a little lower to compensate for the 20" shaft. You'll prob have to play with it alot more that you would the 25" shaft motors, but thats up to you.

you right...just text chris...he said 65 max....all depends on how you build it

[mikedatiger]

Originally Posted by "W"

you right...just text chris...he said 65 max....all depends on how you build it

Correct! When I was building one last year, Chris' advice was to allocate more weight to the rear which would increase top speed. Having said that 65 is plenty fast enough to throw your stomach for a loop as evidenced first hand from riding with "W". He would go 65 in The Perfect Storm. Thankfully he can't go faster