Almost Finished

[Jordan]

Just wanted to share a few pics of my "almost finished" boat. Still have a few misc. things to do. As most of ya'll may know, I was given a boat and motor, but no trailer. I found an older 50's model trailer and re-modeled it. See http://www.saltycajun.com/forum/show...ghlight=jordan for the story

Anyways, I got the boat and motor on the trailer. After just 1 pull, the old merc purred to life after 5 years sitting in a barn. Managed to find the original gas tank that came with the motor also. Running Non-Ethanol gas at a 50:1 ratio makes this puppy purr like a kitten.

Will add more pics at a later time when I add different items to boat and trailer.

[huntin fool]

There ya go Pook!

[Ray]

I had an old 20 HP Merc that looked like that.
It ran for 13 years, then the foot crapped out.
Come to find out, I got some mono behind the
prop and it ate the seal out, letting water in the
foot. Where I ran it, there were no fishermen, at
least none were supposed to be there.
I wanted more power, so sold it as is and bought
a 25 HP.
Them old Merc's will run forever if you mix gas right
and change plugs now and then.

[Bluechip]

Sweet!!!! Good luck on the maiden voyage.

[Jordan]

it will be easter Sunday.

[wtretrievers]

Those older Mercs if theyre getting gas & fire they run. Tough as nails

[DUCKGOGETTER]

Looks good jordan

[Gottogo49]

Thats a classic rig. Good luck with it.

[Jordan]

Thank you all. It is a riveted boat. Going to put it in the lake Sunday to see how many rivets are actually leaking. After I get that part taken care of, I plan on sanding it all down and camo'ing it all out. After that, I will upgrade to LED lights in the boat and on the trailer. Its a project in the making, just takes more $ than time.

[wtretrievers]

Originally Posted by Jordan

Thank you all. It is a riveted boat. Going to put it in the lake Sunday to see how many rivets are actually leaking. After I get that part taken care of, I plan on sanding it all down and camo'ing it all out. After that, I will upgrade to LED lights in the boat and on the trailer. Its a project in the making, just takes more $ than time.

Take it off trailer & set it a couple saw horses put about 6"-8" of water in it with water hose & mark each rivet that is leaking with a sharpie. Much easier to the leaks if you have any. Hopefully not

[Super Spook]

Originally Posted by wtretrievers

Take it off trailer & set it a couple saw horses put about 6"-8" of water in it with water hose & mark each rivet that is leaking with a sharpie. Much easier to the leaks if you have any. Hopefully not

Great idea. I have an old boat I need to do that with at the camp.

[Hydro]

That's cool Jordan ! Ever check out tinboats.net ?

Keep us posted

[wtretrievers]

Originally Posted by wtretrievers

Take it off trailer & set it a couple saw horses put about 6"-8" of water in it with water hose & mark each rivet that is leaking with a sharpie. Much easier to the leaks if you have any. Hopefully not

Try this! To replace a few rivets is alot less than buying another boat!

[Jordan]

Originally Posted by wtretrievers

Try this! To replace a few rivets is alot less than buying another boat!

it was leaking on some of the side rivets also. I now know why I dislike a riveted boat.

[weedeater]

Originally Posted by Jordan

it was leaking on some of the side rivets also. I now know why I dislike a riveted boat.

Put it in the yrd and stick some plants in it

[FF_T_Warren]

nice lil setup I like that trailer. the fenders are cool

[gonzalesdave]

Originally Posted by FF_T_Warren

nice lil setup I like that trailer. the fenders are cool

X2

[saute86]

A friend of mine back in the 80s had a 69 20 merc that was stolen at his camp off south perkins. It was found 6 months later in the river when the water got real low. We drained the head changed the plugs, coil, and cleaned the carbs. It fired up and ran for yrs after that. Cool rig Jorden thats a classic.

[Jordan]

retro style. It has a coil and shock suspension, no leaf springs here. the tongue on the trailer was 1 and 25/32". Cant find them balls anymore.

[SULPHITE]

Looks good my man!