Semi Cleaver

[MattMigues]

I talked to Mr. Danny here and he'd mentioned Yamaha OEM black painted semi cleaver is a great prop in many applications. I'm running a 10.5 x 13p NREB and Stielleto Triad II. I read that I'd almost need to go up 2 pitches beings the props I'm running have moderate cup. So the smallest semi cleaver i can get is 10.25x14p, I'm just looking for some guys that know more about prop designs should I go with 14P or 15P?

[keakar]

Originally Posted by MattMigues

I talked to Mr. Danny here and he'd mentioned Yamaha OEM black painted semi cleaver is a great prop in many applications. I'm running a 10.5 x 13p NREB and Stielleto Triad II. I read that I'd almost need to go up 2 pitches beings the props I'm running have moderate cup. So the smallest semi cleaver i can get is 10.25x14p, I'm just looking for some guys that know more about prop designs should I go with 14P or 15P?

almost all the prop manufacturers have sales service that will take your motor and boat info and give you the correct prop for your boat and be very close pitch wise. anytime you go with a new style prop you have to expect you may need to move up or down a pitch size from the standard recommendations.

tell em what you had and what you had in mind and maybe they have a better idea to get you the performance you are looking for.

[Top Dawg]

I have the 14 pitch. What motor u runnin and what size boat?

[MattMigues]

I have 50 tlr 2 stroke. 15.5ft custom aluminum built modified V

[MattMigues]

ImageUploadedByTapatalk1393985041.545774.jpgImageUploadedByTapatalk1393985051.728928.jpg

[Top Dawg]

14 would prolly run good on it.

[CajunChristian]

14 on a stock 50 will turn right at 5700-5800. Sprinkle a little magic dust in that motor and it will turn that 14 about 6200. When I'm done porting a 50 Tohatsu, they normally turn a 15 pitch Yamaha 6200 loaded.. Tohatsu and Yamaha are not the same port mapping.
D

[Top Dawg]

Originally Posted by CajunChristian

14 on a stock 50 will turn right at 5700-5800. Sprinkle a little magic dust in that motor and it will turn that 14 about 6200. When I'm done porting a 50 Tohatsu, they normally turn a 15 pitch Yamaha 6200 loaded.. Tohatsu and Yamaha are not the same port mapping.
D

Danny, how do these props run on a tunnel? Will I need to add some cup to it?

[Montauk17]

Originally Posted by Top Dawg

Danny, how do these props run on a tunnel? Will I need to add some cup to it?

Yes cup will be needed for a tunnel....the cleaver has little to no cup.

[MattMigues]

Originally Posted by Montauk17

Yes cup will be needed for a tunnel....the cleaver has little to no cup.

I thought that they come with slight cupping? Correct? I can run my Round Ear Blades 3/4 trim 35-37 MPH at 5500-5700 RPM. With the semi cleaver I'm guessing that prop will run right once trim angle puts ventalation plate and keel parrarell? I would like to run one before i spend $360+ because every time I've asked someone about props Yamaha semi cleaver is mentioned.

[CajunChristian]

Originally Posted by Top Dawg

Danny, how do these props run on a tunnel? Will I need to add some cup to it?

VERY light cup. Not anywhere near as much cup as for a round ear prop. Semi cleavers are designed to run surfaced, so they hold extremely well in a high application, such as a tunnel. The fastest marsh tunnels I have set up run with Yamaha semi cleavers on them, they sacrifice no hole shot.
D

[Top Dawg]

Thanks D

[MattMigues]

Originally Posted by Top Dawg

Thanks D

X2 Mr. danny knows some stuff when it comes to rigging!

[Top Dawg]

Originally Posted by MattMigues

X2 Mr. danny knows some stuff when it comes to rigging!

He is the daddy

[MattMigues]

Friend of mine let me borrow a 14p yamaha prop. I had 3 people 18 gallons of fuel 2 batteries and ran right around 5400rpm's. Good mid range and hole shot was pretty good also. It seems to be as fast or faster than my stiletto triad. I'm impressed to say the least.

[CajunChristian]

You might experiment with raising the motor with the Yamaha prop, 1/4" at a time. The Yamaha blade material looks thin, but, I have one that is 20 years old and is used in the marsh every year. Yamaha uses some superior stainless to build that prop. Same props we used on our inflatable raceboats in 99 and 2000. We would buy 16 pitch Yammies and have them raised to 18 pitch props.
These are inflatable tunnel boats that weigh about 125 pounds, with tiller 50's on them. We had a co-pilot to act as trim, I had a 15 year old co-pilot that was fearless. He would sit on the transom down the straights and slide to the front to set the boat to turn. All I ran was Yamaha props pitched up.

Inflatables 0001 - YouTube

Inflatables 0001 - YouTube

D

[Lil Silver]

Originally Posted by CajunChristian

You might experiment with raising the motor with the Yamaha prop, 1/4" at a time. The Yamaha blade material looks thin, but, I have one that is 20 years old and is used in the marsh every year. Yamaha uses some superior stainless to build that prop. Same props we used on our inflatable raceboats in 99 and 2000. We would buy 16 pitch Yammies and have them raised to 18 pitch props.
These are inflatable tunnel boats that weigh about 125 pounds, with tiller 50's on them. We had a co-pilot to act as trim, I had a 15 year old co-pilot that was fearless. He would sit on the transom down the straights and slide to the front to set the boat to turn. All I ran was Yamaha props pitched up.
Inflatables 0001 - YouTube
D

D, that wouldn't have happened to be A. Reed, would it?

[CajunChristian]

Originally Posted by Lil Silver

D, that wouldn't have happened to be A. Reed, would it?

No, I took him riding once just for giggles, threw myself out of the boat jumping a big wake.
My co-pilot was a 15 year old kid named Nick Lee. He was fearless, watch him in the video, this kid was nutz!!!

Inflatables 0001 - YouTube

Inflatables 0001 - YouTube

[MattMigues]

That some fast little boat!

[CajunChristian]

Originally Posted by MattMigues

That some fast little boat!

The motors were "stock" as defined by the rules.. Mine would run mid 60's. I propped the motor for that long start, the first guy to the turn usually has the race won unless someone has 5 mph on him.
D