Tohatsu 30 4 stroke best prop

[bigl3456]

Could someone recommend the best all around prop for 2015 tohatsu 30 short shaft 4 stroke on a alweld semi v 16/48
Stainless, 3-4 blade. Pitch thanks

[clay67]

I have a 2018 Tohatsu 30hp 4 stroke so I don't know if you have the same gear ratio lower unit. But I'm running a 12 pitch powertech 3 blade TLR on a 15/44 alumaweld that is a little on the heavy side for its size. With a two person full fishing load I run 31-32mph with decent holeshot turning 6200 rpm. By myself I run about the same hitting the 6250 rpm rev limiter. I tried a 13 pitch SRA but holeshot suffered and top end really wasn't any better. Maybe one day I'll try a 12 pitch SRA.

[bigl3456]

Originally Posted by clay67

I have a 2018 Tohatsu 30hp 4 stroke so I don't know if you have the same gear ratio lower unit. But I'm running a 12 pitch powertech 3 blade TLR on a 15/44 alumaweld that is a little on the heavy side for its size. With a two person full fishing load I run 31-32mph with decent holeshot turning 6200 rpm. By myself I run about the same hitting the 6250 rpm rev limiter. I tried a 13 pitch SRA but holeshot suffered and top end really wasn't any better. Maybe one day I'll try a 12 pitch SRA.

Did you have to change the trim tab the 12 pitch prop hits the trim tab on mine


Sent from my iPhone using Tapatalk Pro

[clay67]

Both the 12 pitch TLR that I run and the 13 pitch SRA that I tried fit with no problems.

[bigl3456]

Ok thanks man appreciate the info

[clay67]

I have about a quarter inch of clearance from the trim tap.

[bigl3456]

Thanks for the info got the 12 pitch power tech and heck of a difference gonna stick with it


Sent from my iPhone using Tapatalk Pro

[Roy123]

Originally Posted by bigl3456

Thanks for the info got the 12 pitch power tech and heck of a difference gonna stick with it


Sent from my iPhone using Tapatalk Pro

Would you mind sharing what boat/size and performance you are getting? I've been interested in these motors.