Nautic star 21' tunnel trim tab pictures needed & help.

[juicegoose]

I have a NS 2110 tunnel and bought some trim tabs recently for those choppy BL days. Last night I went to setup the location and realized two things.
1. Mounting them in the preferred location(as per lenco) will require me to twist the upper mounting bracket. I can land the actuator naturally but the bracket has to rotate as you can see in the pictures.
2. My hull has a reverse angle to the lower transom line limiting my use of available mounting surface. I'm either going to need to place them in the location shown towards the outside of the hull or all the way in towards the tunnel. Lenco says don't do this and doing so would not allow me to mount my depthfinder transducer or power pole bracket.

Can anyone send me some pictures of a 21' nautic star with trim tabs installed.

Also what do you guys think of rotating the position of the mounting bracket?