Baiting a hole for crappie . . .

[eman]

if you know a plumber and can get scrap PVC ,Make some PVC trees Cement a 5-6 '
piece of 4" pvc pipe into a five gallon bucket and drill holes in it so you can run pieces of 1/2" -3/4" and 1 " pvc thru the main pipe to form a tree.
Before you sink the tree, put a few lbs of cottonseed meal or cakes in the center pipe and cover the top w/ a cap w/ 1/2 " holes drilled in it.
The cottonseed draws the minnows to the tree which then draws the sacalait.
If you cut the rim off the 5 gallon bucket it is allmost impossible to hang up on these trees.