New atv?

[jdm4x43732]

how much you want for that 300??

that's the toughest bikes they ever made, just rear end is weak link.

[huntin fool]

Originally Posted by jdm4x43732

how much you want for that 300??

that's the toughest bikes they ever made, just rear end is weak link.

X2 Still got my 2000 and she's running strong

[Lake Chuck Duck]

Originally Posted by jdm4x43732

how much you want for that 300??

that's the toughest bikes they ever made, just rear end is weak link.

I just picked up a 97 300 a couple weeks ago, desert storm tan. I was looking for that bike specifically and I wasnt going to settle for anything else. What would it cost to repair the gears?

[jdm4x43732]

185905_203470426336484_100000205853407_846809_751256_n.jpg
This is my little brother's 300 from his fleet. He has an unlimited supply of daddy's money so this one is on the back burner he has a 800 Can-Am. It took minor fab work to put a foreman 350 rear end in it. It has to be from an old school 88ish and you have to fit the 300 swing arm to the rear axle housing on the 350. These rear chunks are alot tougher and can be found on ebay for cheap. The Rancher , 400, 450, and 500 foreman will not work the rotation and gear ratio is wrong. Price all depends on how much you find the used parts for. I have about 300 +- in the back end of his.

[jldsc]

Originally Posted by jdm4x43732

Attachment 26794
This is my little brother's 300 from his fleet. He has an unlimited supply of daddy's money so this one is on the back burner he has a 800 Can-Am. It took minor fab work to put a foreman 350 rear end in it. It has to be from an old school 88ish and you have to fit the 300 swing arm to the rear axle housing on the 350. These rear chunks are alot tougher and can be found on ebay for cheap. The Rancher , 400, 450, and 500 foreman will not work the rotation and gear ratio is wrong. Price all depends on how much you find the used parts for. I have about 300 +- in the back end of his.

If you order the ring and pinion gears from honda, get the ones for a 350 rancher..same exact parts but for some reason cheaper from honda than the 300 gears. You will still have to use the 300 axle.